Ettus E310 setup issues. Incompatible Hardware.
3 次查看(过去 30 天)
显示 更早的评论
Hi All.
I'm trying to get the Ettus E310 hardware setup and working with Matlab.
I've installed the comms toolbox and the 'Communications System Toolbox Support Package for USRP® Embedded Series Radio'. However, when I come to the hardware setup I run into problems. I have got the SD card written, and when I get to the 'Verify Radio Connection' it can do the first two two tests (pinging the device), however, when it tries to 'Read hardware information from the radio hardware' it has an error message of 'Incompatible hardware'. On the Matlab terminal this error message is printed out:
%
## Establishing connection to hardware. This process can take several seconds.
Warning: A standard exception occurred during the execution of a driver function. The exception reported was:
(in driver function 'createDriver') testmeas:plugin:pluginNotLoaded Failure to load the requested plugin:
C:\ProgramData\MATLAB\SupportPackages\R2017b\toolbox\shared\sdr\sdrplug\sdrpluginbase\host\derived\bin\win64\libmwsdrembed.dll.
> In comm.internal.SDRSystemBase/infoImpl
In comm.SDRDevUSRPEmbeddedSeries/info
In comm.SDRDevUSRPEmbeddedSeries/getInfo
In usrpembradio.internal.hwsetup.HardwareInterface/getInfo
In usrpembradio.internal.hwsetup.screen.ConfirmConfiguration/testConnnection
In usrpembradio.internal.hwsetup.screen.ConfirmConfiguration>@(varargin)obj.testConnnection(varargin{:})
In matlab.hwmgr.internal.hwsetup.executeWidgetCallback (line 15)
In matlab.hwmgr.internal.hwsetup.Widget/safeCallbackInvoke (line 114)
In matlab.hwmgr.internal.hwsetup.hg.Button/buttonPushedCbk (line 43)
In matlab.hwmgr.internal.hwsetup.hg.Button>@(varargin)obj.buttonPushedCbk(varargin{:}) (line 24)
## Establishing connection to hardware. This process can take several seconds.
I don't know how to get it working, any help is greatly appreciated. I'm running the latest 2017b. Kind regards Will
2 个评论
Neil MacEwen
2017-12-5
Hi Will,
That library file should have been installed with the support package. Can you let me know if it is present on your drive?
C:\ProgramData\MATLAB\SupportPackages\R2017b\toolbox\shared\sdr\sdrplug\sdrpluginbase\host\derived\bin\win64\libmwsdrembed.dll
Thanks,
Neil
回答(1 个)
Neil MacEwen
2018-2-23
Hi Will,
Another customer has experienced the same issue, and by comparing their installation with yours, we were able to figure out that there is a dependency in our code on Simulink. If you are able to install Simulink, this should fix your problem.
We will look into seeing if we can remove the dependency.
Thanks,
Neil
0 个评论
另请参阅
类别
在 Help Center 和 File Exchange 中查找有关 Communications Toolbox 的更多信息
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!