Finding the Minimum Cost
显示 更早的评论
Hey everyone,
I have a problem to solve...
I have to find the dimensions of a cylindrical tank that holds a specific volume at the lowest cost. It consists of a cylinder with 2 plates at either end.
Parameters are:
tank volume = 0.8 m^3
tank thickness = 3 cm
tank material density = 8000 kg/m^3
max diameter = 1.5 m
max cylinder length = 2 m
material cost = 4.5 $/kg
welding cost = 20 $/m
I know how to calculate any specific volume of material from the radius and the length for the material cost.
I also know how to calculate all the weld lengths for that too.
What I need help with is how could I make an IF ELSE statement that generates all the possible values of the radius and length of the cylinder where the volume = 0.8m^3 so that I can then sub those values into my cost evaluation formula.
Any help is greatly appreciated even if just a link to something I should read, Im really stuck.
2 个评论
Walter Roberson
2012-5-4
There are an infinite number of radius / length combinations that meet the volume requirements. You cannot generate all of them individually.
Anthony James
2013-4-29
Thanks for taking the time out to give us a hand. Have a good starting point and can improve on the user friendliness of my program. Then hopefully get a few pictures in for top marks.
采纳的回答
Image Analyst
2012-5-4
You can do it numerically if you want using an exhaustive brute force method (which is also pretty fast): I've left out some parts for you to do, but when I ran it I got this:
The lowest cost was $6523.24.
The best length was ------. (You run it to find out)
The best radius was ------.
Here's the code:
tank_volume = 0.8 %m^3
tank_thickness = 3 %cm
tank_material_density = 8000% kg/m^3
max_diameter = 1.5% m
max_cylinder_length = 2% m
material_cost = 4.5 %$/kg
welding_cost = 20 %$/m
lowestCost = inf;
for cylinderLength = 0.001 : 0.001 : 2
radius = sqrt(tank_volume / (pi * cylinderLength));
surfaceAreaTop = 2 * pi * radius^2;
surfaceAreaSide = ?????????;
surfaceArea = surfaceAreaTop * 2 + surfaceAreaSide;
tank_weight = ?????????; * tank_thickness/100;
totalCost = tank_weight * material_cost + welding_cost * cylinderLength;
if totalCost < lowestCost
% Save lowestCost, bestLength, bestRadius.
?????????;
end
end
fprintf('The lowest cost was $%.2f.\nThe best length was %.3f.\nThe best radius was %f.\n',...
lowestCost, bestLength, bestRadius);
3 个评论
Jacob
2012-5-12
Image Analyst
2012-5-12
I used 0.001 because that was just perfect for 3 digits of accuracy. Going any more than that will get you more digits of "accuracy" but that's really not warranted since your initial parameters were not specified accurately out to the 4th or 10th decimal place. So your "accuracy" is really kind of fake, since what you got would change a lot if the tank volume were 8.04 instead of 8.00. You can do tests to see where it starts to change in your total cost if you change any of the parameters. And, in fact it won't make any real world difference if you're accurate to the nearest micro-cent when payments in the real world are made to the nearest cent. None the less, it's no big deal for the computer to calculate out to the nearest nano-cent if you tell it to, so you can do that if you want, I'm just telling you some real world, practical considerations.
Anthony James
2013-4-29
Good Work thanks Image Analyst
更多回答（1 个）
Walter Roberson
2012-5-4
0 个投票
Construct the cost formula in one parameter and use one of the minimizers on it. Or if you have the symbolic toolbox, do minimization the calculus way (differentiate, find the zeros of that, etc.)
类别
在 帮助中心 和 File Exchange 中查找有关 Elementary Math 的更多信息
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!
Translated by 
