清空筛选条件
清空筛选条件

MATLAB gets stuck in the "Initializing" state during startup from bat file

9 次查看（过去 30 天）
Matlab2010
Matlab2010 2012-5-8
I am running win7 and MATLAB 2010B. The MATLAB licence is held on our lab licence server.
When I start MATLAB normally it runs fine. "Initializing" takes a few seconds and then proceeds to "Ready" as expected. Great.
I now ask MATLAB to start through a bat file on Task Scheduler at 3am (say). When I get into the office at 7am (yeah, sure!) I see MATLAB has fired the IDE up fine but has got stuck in the intializing state.
Hence this problem only occurs when running from bat file.
I read the below: http://www.mathworks.co.uk/support/solutions/en/data/1-2Z18MA/ I do not have any such MATLAB related system env variables specified, but I do not think this relates to a MATLAB licence held on a server.
I put pause(120) at the start of my matlab file, but it makes no diffference.
I then try and modify my bat file from:
start matlab -r "addpath('D:\CODE\MATLAB\Matlab_Code\startUp');abs_autoStartUp"
to
start matlab -c 28000@999.999.999.6 -r "addpath('D:\CODE\MATLAB\Matlab_Code\startUp');abs_autoStartUp"
Where the port and the ip address are the ones specified in network.lic in my program files. The path relates to the location of abs_autoStartUp.m.
This seems to make no difference.
This is running on a stand alone machine, not connected to a domain.
(apologies, as this is a "repost" as it was accidentially accepted as being correct the first time round).
any ideas?
thanks!!
  1 个评论
Walter Roberson
Walter Roberson 2012-5-8
Cross-reference: http://www.mathworks.com/matlabcentral/answers/37741-matlab-gets-stuck-in-the-initializing-state-during-startup-from-bat-file

请先登录，再进行评论。

请先登录，再回答此问题。

采纳的回答

Matlab2010
Matlab2010 2012-5-16
just spoke to matlab about this.
When calling matlab from the command line and going straight into a function, matlab will stay in the intializing state as it takes the function being called as part of the intialization.
Their opinion is that this shouldn't effect anything else.

更多回答（2 个）

Daniel Shub
Daniel Shub 2012-5-9
More questions than answers, but I will throw them out as an answer:
In the morning after the machine has been rebooted from the Task Scheduler can you launch MATLAB?
Does the license server get powered down at 3am?
What about if your bat file "sleeps" for a couple of minutes after rebooting so the network can come up?
Can you contact the license server from the bat file?
  8 个评论
显示 6更早的评论
Matlab2010
Matlab2010 2012-5-11
my above answer is
1.open DOS
2. Copy and paste the whole line of code in.
3. hit enter.
...
4. Watch matlab start and stay in the intializing mode.

请先登录，再进行评论。

Daniel Shub
Daniel Shub 2012-5-11
1. open DOS
2. type
matlab -r "addpath('D:\CODE\MATLAB\Matlab_Code\startUp');abs_autoStartUp"
3. hit enter
Critical to this is not to use "start"
  4 个评论
显示 2更早的评论
Daniel Shub
Daniel Shub 2012-5-14
That works fine for me. I would think about creating a new temporary user and seeing if it works for that user. If it doesn't, then contact technical support with all the details you have given here.

请先登录，再进行评论。

类别

在 Help Center 和 File Exchange 中查找有关 Startup and Shutdown 的更多信息

标签

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by