清空筛选条件
清空筛选条件

Matlab gets stuck in publish function

24 次查看（过去 30 天）
Kelton George
Kelton George 2018-2-5
回答： Jeremy Thomas 2018-3-19
I'm trying to use the Matlab publish command to make my code into a pdf, but it gets stuck in an infinite loop while attempting to publish where I have to use control-c to get out. Here is my code and the output in the command window after I manually exit from the codes is below.
clc; clear; close all;
N = 50; %mols
Vo = 10;% L initial volume
ya = 0.5; %vapor fraction
delta = 2;
epsilon = ya*delta;
Nao = N*ya;
k = 0.45;
t = 60; %time
Cao=Nao/Vo;
Xa = 2/(Vo/(Nao*(k*t+1/Cao))+1)-1;
XA = (Cao*k*Nao*t-Cao*Vo+Nao)/(Cao*k*Nao*t+Cao*epsilon+Nao);
fprintf('The conversion for isobarically condition %.6f \n',Xa)
Constant Voume
Xa2 = 1-(k*t*Cao)^-1;
fprintf('The conversion for isochoric condition %.3f \n',Xa2)
%%Concentration Figure
tc = linspace(1,60);
Xac = 2./(Vo./(Nao.*(k.*tc+1./Cao))+1)-1;
Xac2 = 1-(k.*tc.*Cao).^-1;
figure(1);
plot(tc,Xac,tc,Xac2,'LineWidth', 2)
xlabel('Time (s)'); ylabel('Conversion X');
title('Conversion Vs Time of Reactors');
legend('Isobaric','Isochoric','Location','Best'); axis tight; grid on;
set( gca, 'FontSize', 16 )
saveas(figure(1),'Problem3Conversion.png')
publish('Hw3_problem3.m')
end
The command window displays this after forcing to exit from running
Operation terminated by user during alternatePrintPath
In print (line 82)
pj = alternatePrintPath(pj);
In saveas (line 181)
print( h, name, ['-d' dev{i}] )
In Hw3_problem3 (line 37)
saveas(figure(1),'Problem3Conversion.png')
In evalmxdom>instrumentAndRun (line 109)
text = evalc(evalstr);
In evalmxdom (line 21)
[data,text,laste] = instrumentAndRun(file,cellBoundaries,imageDir,imagePrefix,options);
In publish
In Hw3_problem3 (line 39)
publish('Hw3_problem3.m')
In evalmxdom>instrumentAndRun (line 109)
text = evalc(evalstr);
In evalmxdom (line 21)
[data,text,laste] = instrumentAndRun(file,cellBoundaries,imageDir,imagePrefix,options);
In publish
In Hw3_problem3 (line 39)
publish('Hw3_problem3.m')

请先登录，再回答此问题。

回答（2 个）

Jeremy Thomas
Jeremy Thomas 2018-3-19
It looks like you're calling publish inside the file you're trying to publish. Remove publish from the script and call publish on the script from the matlab command line.
Chetna Jain
Chetna Jain 2018-2-21
Hi Kelton ,
I have informed the development team about this issue. They are looking into it.
Meanwhile , You can use the "publish" method(line 39, as per what I see in above post) outside the "Hw3_problem3" file i.e from MATLAB prompt after removing it from file.

类别

在 Help Center 和 File Exchange 中查找有关 MATLAB Report Generator 的更多信息

标签

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by