Send data from Raspberry Pi to MATLAB?

Question

Palash Thakur 2018-2-27

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/385237-send-data-from-raspberry-pi-to-matlab

回答： Yingnan Huang 2020-9-21

I am tracking the position of an object on a Raspberry Pi 3 and am generating an array of object positions, which I want to send continuously to a MATLAB script running on my PC, which will plot the object's trajectory in x and y. What's the best way I can go about sending the position values to MATLAB?

2 个评论
显示无隐藏无

Walter Roberson 2018-2-27

Are you programming at the MATLAB level or at the Simulink level? At the Simulink level, there are TCP and UDP blocks for Raspberry Pi

Palash Thakur 2018-2-27

编辑：Palash Thakur 2018-2-27

I am using MATLAB, actually. I wanted to take the position, run them through a control algorithm, and control two servos accordingly (all this as quickly as possible). Right now I just wanted to plot the data.

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Walter Roberson 2018-2-27

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/385237-send-data-from-raspberry-pi-to-matlab#answer_307492

Create a serial connection. Have the raspberry pi print the values on the serial port. Read from the serial port on the MATLAB side. https://www.mathworks.com/help/supportpkg/raspberrypiio/ref/raspi.serialdev.read.html

This assumes you have a serial or USB-over-serial connection.

Alternately, it is possible to write some C code for the Pi that sends information by TCP or UDP, which you could receive on the MATLAB end by using the Instrument Control Toolbox tcp() or udp() functions, or by grabbing the File Exchange contribution tcpudpip . I do not know how best to write the C code for TCP or UDP for the raspberry pi... I do not happen to have experience with the available libraries for raspberry pi.