How to save MPC (model predictive controller) to be used later on? The error message is attached.

Question

Ismaeel 2018-6-3

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/403735-how-to-save-mpc-model-predictive-controller-to-be-used-later-on-the-error-message-is-attached

评论： Lana Khaleel 2023-12-28

I have designed an MPC controller in Simulink, and it works well as long as I don't exit-reopen MATLAB or don't clear the workspace. Once I clear it or exit, the following error I get (attached) when I run the Simulink model. How one can save the designed controller to be used later on? Thanks in advance

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

Ismaeel 2018-6-3

Any idea?

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

VAN NGOC MAI 2018-8-3

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/403735-how-to-save-mpc-model-predictive-controller-to-be-used-later-on-the-error-message-is-attached#answer_331430

I am also facing this problem. Did you find out the solution for this one?

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

Answer 2

Andrés Duque Amaya 2018-11-1

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/403735-how-to-save-mpc-model-predictive-controller-to-be-used-later-on-the-error-message-is-attached#answer_344648

I have the same problem. Furthermore,when I apply dynamic optimization from a m-file,the simulink model don't evaluate the MPC controller structure.

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

Answer 3

Jon 2019-10-10

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/403735-how-to-save-mpc-model-predictive-controller-to-be-used-later-on-the-error-message-is-attached#answer_395768

编辑：Jon 2019-10-10

在 MATLAB Online 中打开

A way around this problem is to:

1) Design your controller

2) Export your controller to the workspace

3) Save your controller in a .mat file and

4) Reload it before running the simulation.

So after designing the controller you could export your controller to the workspace (an option in the mpc designer app), then save your controller using:

save('MPC01.mat','MPC01')

later, when you want to rerun the simulation using your controller load it first using:

load MPC01

Obviously if your controller has another name then use that instead of MPC01

While this works it seems like a kludgey approach. I would have expected that the currently designed controller would automatically be saved with the Simulink model. Maybe the developers can take note.

p.s. I noticed you asked this about a year ago. I am running 2019b and experience the same issue you described. The solution I outlined will work, but in the meantime have you found any other solution?