how to modify the axes scale when we plot values in both y axis with same x axis line.

Question

KAKOLI DEY 2018-6-8

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/404647-how-to-modify-the-axes-scale-when-we-plot-values-in-both-y-axis-with-same-x-axis-line

评论： Aquatris 2018-6-8

x1=xlsread('ERROR.xlsx') y1=xlsread('ROUND.xlsx') plot(x1); xlabel('data ratio'); ylabel('Percentage Error'); yyaxis right;

plot(y1); ylabel('Energy');

ERROR DATA 53.7578 31.3263 6.5007 2.3187 1.0973 0.9278 0.9654 0.7224 0.6327 0.549 0.4588 0.3607 0.3277 0.235 0.0671 0.1379 5.45E-02 7.50E-04 9.65E-07

ROUND DATA 282 299 305 324 341 360 378 394 413 481 496 550 569 728 794 804 1000 1000 1000 OUTPUT

how do i change in x axes,yaxes,yaxes right.In this particular example above I want to change the limit of x axes 0 to 1 with difference .1,y axxes 0 to 100 with difference 10,yaxes right 1000 to 100 with difference -50.

5 个评论
显示 3更早的评论隐藏 3更早的评论

Aquatris 2018-6-8

在 MATLAB Online 中打开

Those are really dense intervals and you did not supply data for the x-axis. I am sharing the code for more coarse intervals where you can play with the numbers to change however you see fit. the "e" and "o" variables are the error and the output you had in your post. If you want grids as well, you can try "grid on" or "grid minor" after the plot is generated.

e = [53.7578 31.3263 6.5007 2.3187 1.0973 0.9278 0.9654 0.7224 ...
0.6327 0.549 0.4588 0.3607 0.3277 0.235 0.0671 0.1379 5.45E-02 ... 
7.50E-04 9.65E-07];
o = [282 299 305 324 341 360 378 394 413 481 496 550 569 728 ...
  794 804 1000 1000 1000];
x1 = e; y1 = o;
plot(x1); xlabel('data ratio'); ylabel('Percentage Error');
set(gca,'xLim',[0 20])   % x-axes lim to 0 - 20  
set(gca,'yLim',[0 100])  % y-axes lim to 0 - 100
set(gca,'xTick',0:1.3:20)% x-axes ticks 0 to 20  with 1.3 
set(gca,'yTick',0:7:100) % y-axes ticks 0 to 100 with 7
yyaxis right;
plot(y1)
set(gca,'yLim',[100 1000])  % y-axes right limits 0 and 1000
set(gca,'yTick',100:50:1000)% y-axes right 100 and 1000 with 50  
set(gca,'Ydir','reverse')   % flip the y-axis right

KAKOLI DEY 2018-6-8

This quite ok,with slight problem.X axes range within 0 to 1 with difference .1

Aquatris 2018-6-8

在 MATLAB Online 中打开

For that you need to specify the xData as well. Since you are plotting like "plot(y1)", x-axis represent the data number (data #1, data #2). This is the reason why the first data point is at x = 1, second one is x = 2 and so on.

If you have the xData, you need to plot using "plot(xData,y1)". So that when you set the x-axis to be between 0 and 1, there will be data there assuming xData is between 0 and 1.

To change the x-axis range, make this change in the code;

set(gca,'xLim',[0 1])    
set(gca,'xTick',0:.1:1)

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Mandeep Singh 2018-6-8

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/404647-how-to-modify-the-axes-scale-when-we-plot-values-in-both-y-axis-with-same-x-axis-line#answer_323789

在 MATLAB Online 中打开

From my understanding of the question, you want to change the number of ticks and their corresponding labels in the plot. To achieve that, please follow the below steps which considers a random data set for plotting.

y = [282 299 305 324 341 360 378 394 413 481 496 550 569 728 794 804 1000 1000 1000]
plot(y)
xticks([0:2:20])
xticklabels([0:0.1:1])

Follow the same steps for changing the labels for both the y axes.

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

how to modify the axes scale when we plot values in both y axis with same x axis line.

5 个评论
显示 3更早的评论隐藏 3更早的评论

回答（1 个）

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

另请参阅

类别

标签

Community Treasure Hunt

how to modify the axes scale when we plot values in both y axis with same x axis line.

5 个评论 显示 3更早的评论隐藏 3更早的评论

回答（1 个）

0 个评论 显示 -2更早的评论隐藏 -2更早的评论

另请参阅

类别

标签

Community Treasure Hunt

5 个评论
显示 3更早的评论隐藏 3更早的评论

0 个评论
显示 -2更早的评论隐藏 -2更早的评论