variable Impedance

Question

Papa 2012-6-6

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/40466-variable-impedance

回答： Sabin 2024-1-23

Hey how is it possible to build a variable Impedance with Simpowersystems?

Thanks

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

Saeed Rezaee 2020-7-28

If it is a simple RL impedance, you just need to use a controlled current source where the measured current is passed through an integrator and the output is the control input of the source. Next, you just need to integrate a ramp or any varying block in the control loop that generates the current based on the differential equation that rules the RL circuit; alternatively you can use a PI block where the gains are set as external inputs. You should be able to build a generic series or parallel RLC impedances as well.

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Sabin 2024-1-23

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/40466-variable-impedance#answer_1395731

In Simscape Electrical you can build a variable impedance by using controlled elements such as controlled resistors, inductors, or capacitors, whose values are dynamically adjusted during simulation based on control signals. Without knowing more about specific requirements it is difficult to provide a more specific answer.