Eliminate point of view effects on a surface before processing the image.

Question

Mohammad Sarhil 2018-8-6

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/413721-eliminate-point-of-view-effects-on-a-surface-before-processing-the-image

评论： Florian Morsch 2018-8-14

Hello,

I have some concrete cross-sections with fibers. The camera will be at a central position and due to point of view effects, the edges will be deformed. I made a chess board to use it first to take out the point of view effects with same size of the cross-sections (see the photo).

The procedure:

- Fix the camera and the specimens position. - Take the image of the chess board. - Take the images of specimens with out changing the positions. - Use the chess board image to develop a code to reverse the point of view effects.

My questions: What is the transformation which should be used to reverse the point of view effects? Is it implemanted on Matlab already? Is the transformation simply linear or not? Do you have any lectures regarding this?

Thank you.

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Florian Morsch 2018-8-7

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/413721-eliminate-point-of-view-effects-on-a-surface-before-processing-the-image#answer_331843

If you have the camera calibration toolbox at you hand you can simply use that to calibrate your camera with the checkerboard.

With the camera parameters from the calibration you can then use undistortImage() ( https://de.mathworks.com/help/vision/ref/undistortimage.html ) to correct the lense distortion.