How to plot smooth graph?
显示 更早的评论
Hi, I was stuck here.. can someone help me out? How do I make the Pbat1 and Pbat2 smooth?
P_load = [0,8000,10000,11000,20000,25000,25000,21000,30000,20000,12000,45000,12000,45000,23300,12000,15000,17000,20000,16000,12200,1000,2000,100];% Watts
plot(P_load,'linewidth', 2)
P_gen = ones(1,24).*29000; % Watts
P_lowerlimit = ones(1,24).*10000; % Watts
hold on
plot(P_gen, 'linewidth', 2)
plot(P_lowerlimit, 'linewidth', 2)
grid
xlim([1,24])
xlabel('Time (hours)')
ylabel('Power (Watts)')
hold on
Pnet1 = [];
Pbat1 = [];
Pnet2 = [];
Pbat2 = [];
for h = 1:24
Pnet1(h) = P_gen(h) - P_load(h);
Pnet2(h) = P_lowerlimit(h) - P_load(h);
if Pnet1(h) > 0
Pbat1(h) = 0;
else
Pbat1(h) = P_load(h) - P_gen(h);
end
if Pnet2(h) < 0
Pbat2(h) = 0;
else
Pbat2(h) = [P_gen(h) - P_load(h)]/3;
end
end
plot(Pbat1, 'linewidth', 3)
plot(Pbat2, 'linewidth', 3)
legend('Load','Generator','Lower limit','Battery energy(Discharge)','Battery energy(Charge)')
If possible, i need with spline code. Help appreciated, thank you.
采纳的回答
madhan ravi
2018-11-1
编辑：madhan ravi
2018-11-1
P_load = [0,8000,10000,11000,20000,25000,25000,21000,30000,20000,12000,45000,12000,45000,23300,12000,15000,17000,20000,16000,12200,1000,2000,100];% Watts
x=1:numel(P_load)
xx=linspace(1,numel(x),1000)
yy=interp1(x,P_load,xx,'pchip')
plot(x,P_load,'*g',xx,yy,'-k','linewidth', 2)
P_gen = ones(1,24).*29000; % Watts
P_lowerlimit = ones(1,24).*10000; % Watts
hold on
xx=linspace(1,numel(x),1000)
yy=interp1(x,P_gen,xx,'spline')
plot(x,P_gen,'og',xx,yy,'-m','linewidth', 2)
xx=linspace(1,numel(x),1000)
yy=interp1(x,P_lowerlimit,xx,'spline')
plot(x,P_lowerlimit,'or',xx,yy,'-b','linewidth', 2)
grid
xlim([1,24])
xlabel('Time (hours)')
ylabel('Power (Watts)')
hold on
Pnet1 = [];
Pbat1 = [];
Pnet2 = [];
Pbat2 = [];
for h = 1:24
Pnet1(h) = P_gen(h) - P_load(h);
Pnet2(h) = P_lowerlimit(h) - P_load(h);
if Pnet1(h) > 0
Pbat1(h) = 0;
else
Pbat1(h) = P_load(h) - P_gen(h);
end
if Pnet2(h) < 0
Pbat2(h) = 0;
else
Pbat2(h) = [P_gen(h) - P_load(h)]/3;
end
end
xx=linspace(1,numel(x),1000)
yy=interp1(x,Pbat1,xx,'spline')
plot(x,Pbat1,'ok',xx,yy,'-y','linewidth', 3)
xx=linspace(1,numel(x),1000)
yy=interp1(x,Pbat2,xx,'spline')
plot(x,Pbat2,'oc',xx,yy,'-r','linewidth', 3)
legend('Load','Generator','Lower limit','Battery energy(Discharge)','Battery energy(Charge)')
14 个评论
madhan ravi
2018-11-1
use the same method like last time
madhan ravi
2018-11-1
if something is not clear let me know
Ain Athirah
2018-11-1
编辑：Ain Athirah
2018-11-1
madhan ravi
2018-11-1
Anytime :)
Ain Athirah
2018-11-1
madhan ravi
2018-11-1
编辑：madhan ravi
2018-11-1
They are markers , read the below link for more explanation https://www.mathworks.com/help/matlab/ref/linespec.html
Ain Athirah
2018-11-1
madhan ravi
2018-11-1
See the previous comment
Ain Athirah
2018-11-1
madhan ravi
2018-11-1
You’re welcome
Ain Athirah
2018-11-1
Ain Athirah
2018-11-1
编辑：Ain Athirah
2018-11-1
I have a new problem now on how to label them? by using legend code, seems it be different between points and line.. see the picture:
How to make them be one? as they need to be. Thanks :D
madhan ravi
2018-11-1
Please ask a separate question
Ain Athirah
2018-11-1
更多回答（0 个）
类别
在 帮助中心 和 File Exchange 中查找有关 Get Started with Signal Processing Toolbox 的更多信息
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!
Translated by 
