清空筛选条件
清空筛选条件

how to programm lcd display with simulink on raspberry pi

11 次查看（过去 30 天）
steffen seligmann
steffen seligmann 2018-11-9
评论： Rohan Sanghavi 2021-1-10
Im currently trying to programm a small led display https://www.amazon.de/gp/product/B01L9GC470/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 . So i wanna do it with Matlab SImulink but cant find any documentation on it. Any help would be nice.

请先登录，再回答此问题。

采纳的回答

Mark McBroom
Mark McBroom 2018-11-10
The interface to the display is I2C. You'll need to use the I2C Master Read and I2C Master Write blocks that come with the Simulink Support Package for Raspberry Pi .
  4 个评论
显示 2更早的评论
Walter Roberson
Walter Roberson 2021-1-9
https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf
https://randomnerdtutorials.com/guide-for-oled-display-with-arduino/
https://learn.adafruit.com/monochrome-oled-breakouts/arduino-library-and-examples
Section 8.7 of the PDF makes it clear that the SSD1306 is fundamentally a bit-mapped display. You cannot send it characters for it to convert into display.
Please remember that "characters" are not something that can be displayed. "Characters" need to be interpreted through "font family", "font size", "font weight", "font angle", and rotation.
Computer Vision insertText() and insertShape() can be used to render characters and shapes into an array that can then be sent to the device.
Rohan Sanghavi
Rohan Sanghavi 2021-1-10
My question is a bit different. I need to connect to an RG1602A to raspberry pi, via simulink.
My board is Raspberry pi 3 model B
I have an i2c connection. But I dont know how to include the initialisation steps in the simulink model.
Any help would be great.

请先登录，再进行评论。

更多回答（0 个）

类别

在 Help Center 和 File Exchange 中查找有关 Raspberry Pi Hardware 的更多信息

标签

产品


版本

R2018b

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by