Set Arduino IDE path

Question

Roberto Belotti 2019-1-2

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/437996-set-arduino-ide-path

评论： Madhu Govindarajan 2019-1-28

I just installed the hardware support package for Arduino, but it doesn't work. I think that the problem is that the package cannot find my installation of Arduino IDE. When I run the command arduinoio.ideroot I get the string 'arduino-1.8.1', which is not even close to the actual path of my Arduino IDE (i.e. 'C:\Program Files (x86)\Arduino')

Do you know how can I set the path properly? Thanks!

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Madhu Govindarajan 2019-1-4

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/437996-set-arduino-ide-path#answer_354991

To set your expectations correctly, MATLAB Support package attempts to install its own Arduino IDE which is 1.8.1 and that is the one it is supposed to find when you type arduinoio.IDERoot.

If the output is just arduino1.8.2, there could be an installation issue. Can you try uninstalling the support package and reinstalling them with administrator access. You can do that by right clicking on MATLAB icon and selecting Run as administrator.

After this you can check again with the same command and the default location is inside C:\ProgramData\MATLAB\Supportpackages\<Release>\3P.instrset\arduinoide.instrset\arduino-1.8.1

HTH,

Madhu

2 个评论
显示无隐藏无

Roberto Belotti 2019-1-4

Administrator privileges did the trick! Thanks!

Madhu Govindarajan 2019-1-4

Great :)

请先登录，再进行评论。

Answer 2

amina ibrahim 2019-1-28

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/437996-set-arduino-ide-path#answer_358387

my matlab is on E/ and support package is now on c/ where should i move it on matlab installaton ?

to bin ?

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

Madhu Govindarajan 2019-1-28

Hi amina,

I am not sure where you saw that one should move the support package location between different drives, but I would recommend not to do that. Can you detail what your issues are running into and what you have tried so far?

Madhu

请先登录，再进行评论。