Current figure window resizes when calling "print" [recent change in functionality]?

Question

Dan Gianotti 2019-1-10

2
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/439246-current-figure-window-resizes-when-calling-print-recent-change-in-functionality

回答： Christopher Beckett 2019-12-19

I'm using 2018b on MS Windows 10 and have recently noticed that calling either of

print(gcf)
print(gcf,'-dpng','filename.png')

first resizes the gcf window before printing. I believe this has something to do with MS Windows and printers (even software printers?), as I think the behavior changed after a MS Windows auto update (and I am fairly confident that this was not the default behavior at other times while using 2018b).

Is this a known issue? Can I make it stop? I use print regularly for figure export to image files, and resizing the gcf window changes aspect ratio, font size, etc.

6 个评论
显示 4更早的评论隐藏 4更早的评论

Dan Gianotti 2019-1-11

在 MATLAB Online 中打开

Interestingly, no -- that one worked (the figure stayed with position [100,100,200,160] throughout).

This led me down an interesting path about the maximize button in Windows. This is the behavior I can now confidently report:

H = figure;
H.Position
ans =
   404   246   560   420
% MANUALLY CLICK THE WINDOWS 'MAXIMIZE' BUTTON IN THE UPPER RIGHT CORNER OF THE WINDOW
H.Position
ans =
           1        -281        1920         973
print(H); % Results are the same if calling print(H,'-dpng','tmp.png')
H.Position
ans =
   404   246   560   420
% Window has reverted to earlier size AND has become the active/current focus window
% Now try resizing manually:
set(H,'Position',[1 -281 1920 973]);
print(H);
H.Position
ans =
           1        -281        1920         973
           
% H has NOT become the active window, but rather matlab console or editor retains current focus

So it seems like this maybe only happens if I hit the Mxaimize/Restore Down button. A fascinating piece of this is the following:

H = figure;
H.Position
ans =
   404   246   560   420
% MANUALLY CLICK THE WINDOWS 'MAXIMIZE' BUTTON IN THE UPPER RIGHT CORNER OF THE WINDOW
H.Position
ans =
           1        -281        1920         973
% Now manually set the gcf position:
set(H,'Position',[1 -281 1920 973]); % Manually set the position to be the same is it is currently
print(H);
H.Position
ans =
   404   246   560   420

So I think that any time I have touched the maximize button, the next call to print will make the figure active, resize it, and then print.

As for ResizeFcn, I haven't come across these before, so am looking into what it means (presumably no is the answer?).

Dan Gianotti 2019-1-11

编辑：Dan Gianotti 2019-1-11

在 MATLAB Online 中打开

As I dig around, another noticeable point is that the resizing happens sometime in the call to print. If I run

print(H); H.Position

on one line in the console (or by selecting them both in the editor and pressing F9, or using Ctrl+Enter as a code block, etc.) then the reported size is [1 -281 1920 973], but if I wait a second in between the commands, then the window resizing will have already occurred and H.Position gives [404 246 560 420], which makes me think this is something about MS Windows printing stuff taking control of the figure window away from Matlab.

Long story short, I can work around this no problem by never again touching the maximize button for figures. But it seems strange/not optimal.

EDIT:

In response to your question about the output sizes, if I maximize a figure, then call print, the output file is of a size and aspect ratio corresponding to the maximized figure. Then, within the output file, the printed image will be the size of the (newly-resized) figure. So for a png, my image will now be ~ 80% whitespace with a little figure printed somewhere inside. This does not happen if I do not touch the maximize button. Maybe Matlab tells the printer driver what size page first, then Windows makes the figure active and resizes the figure, then Matlab passes along the figure data? (I, perhaps obviously, have no idea how printer drivers work...)

Walter Roberson 2019-1-11

MATLAB resizes the figure and changes its background during print in order to satisfy PaperPosition and Hardcopy inverse requirements , and then changes back. This is often visible. There are race conditions if you try to interact with the figure during that time.

Jan 2019-2-27

编辑：Jan 2019-2-27

[MOVED from section for answers] Steve Grobler wrote:

Hi Dan,

I am finding the same issue. It's extremely annoying! (Windows 7 Professional)

Thank you for investigating and isolating the cause.

I've noticed that if I manually re-size the figure instead of (or after) using the maximise button, then the problem also does not occur.

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Christopher Beckett 2019-12-19

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/439246-current-figure-window-resizes-when-calling-print-recent-change-in-functionality#answer_407064

在 MATLAB Online 中打开

Hi all,

I found this same issue as well and related it back to the print command. Instead of using print, I used the saveas function:

set(gcf,'PaperUnits','inches');
set(gcf,'PaperSize', [16 8]);
set(gcf,'PaperPosition',[-1 0 18 8]);
set(gcf,'PaperPositionMode','Manual');
saveas(gcf,'MyFig.pdf')

which has worked so far, with the same result as when using "print" with Windows 8, i.e. the saved figure is no longer affected by window resizing.

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

Current figure window resizes when calling "print" [recent change in functionality]?

6 个评论
显示 4更早的评论隐藏 4更早的评论

回答（1 个）

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

另请参阅

类别

标签

产品

版本

Community Treasure Hunt

Current figure window resizes when calling "print" [recent change in functionality]?

6 个评论 显示 4更早的评论隐藏 4更早的评论

回答（1 个）

0 个评论 显示 -2更早的评论隐藏 -2更早的评论

另请参阅

类别

标签

产品

版本

Community Treasure Hunt

6 个评论
显示 4更早的评论隐藏 4更早的评论

0 个评论
显示 -2更早的评论隐藏 -2更早的评论