try to simulate neural network in Matlab by myself

Question

alireza mirzargar 2012-7-30

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/44895-try-to-simulate-neural-network-in-matlab-by-myself

hi every one, i tried to create a neural network that estimate y = x ^ 2 so i create a fitting neural network and give some sample for input and out put. then i tried to come this network to c++. but the result is different i tried to find why this happened. i wrote this command in matlab :

purelin(net.LW{2}*tansig(net.IW{1}*in+net.b{1})+net.b{2})

and the result was 16.0828 for : in = 3

my network has 2 neurons. and other information are :

net.IW : 0.344272596370387 0.344111217766824

net.LW : 31.7635369693519 -31.8082184881063

b : -1.16610230053776 1.16667147712026

b2 : 51.3266249426358

so is any body have any idea why this has happened? thank you

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Greg Heath 2012-7-31

1
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/44895-try-to-simulate-neural-network-in-matlab-by-myself#answer_55079

I used fitnet(2) with all defaults except for

rng(0)

net.trainparam.goal = MSE00/100;

where MSE00 is the mse for the constant mean value (=1704) output model.

It converged resulting in

Nepochs = tr.epoch(end) % 5

NMSEtrn = tr.perf(end)/MSE00 % 0.0018431

NMSEval =tr.vperf(end)/MSE00 % 0.00068653

NMSEtst = tr.tperf(end)/MSE00 % 0.0016467

whereas

y3 = net(3) % 70.409 (instead of 3^2 = 9)

sqerr3 = (y3-3^2)^2 % 3771.1

Nsqerr3 = sqerr3/MSE00 % 0.0016237

So, to get a good feel for how well the net is performing

look at the normalized test set NMSEtst.

Hope this helps.

Greg

3 个评论
显示 1更早的评论隐藏 1更早的评论

Greg Heath 2012-8-2

编辑：Greg Heath 2012-8-2

close all, clear all, clc, plt=0

format short g

x = -71:71;

t = x.^2;

[I N] =size(x) % [ 1 143 ]

[O N ] = size(t) % [ 1 143 ]

Neq = N*O

plt=plt+1,figure(plt)

subplot(211)

plot(x,t,'k--','LineWidth',2)

ylabel(['Target (black dash)',' Output(red)'])

hold on

y00 = repmat(mean(t,2),1,N) % 1704*ones(1,143)

Nw00 = numel(O) % 1

MSE00 = sse(t-y00) /Neq % 2322552

MSE00a = sse(t-y00)/(Neq-Nw00) % 2338908

W = t/[ones(1,N);x] % [ 1704 7.66e-16 ]

Nw0 = numel(W) % 2

y0 = W*[ones(1,N);x]; % y0 = y00

MSE0 = sse(t-y0) /Neq % 2322552

MSE0a =sse(t-y0)/(Neq-Nw0) % 2355496

R20 = 1-MSE0/MSE00 % 0

R20a = 1-MSE0a/MSE00a % -0.0071

plot(x,y0,'b','LineWidth',2)

hold on

rng(0)

H = 2

Nw =(I+1)*H+(H+1)*O % 7

R2agoal = 0.99

MSEgoal = (Neq-Nw)*MSE00a*(1-R2agoal)/Neq % 22244

net = fitnet(H);

MSEgoal = 0.01*(Neq-Nw)*MSE00/Neq % 22089

net.trainParam.goal = MSEgoal % 23225.52

[net tr] = train(net,x,t); % Using defaults

Nepochs = tr.epoch(end) % 5

NMSEtrn = tr.perf(end)/MSE00 % 0.0018431

NMSEval =tr.vperf(end)/MSE00 % 0.00068653

NMSEtst = tr.tperf(end)/MSE00 % 0.0016467

y = net(x)

e = t-y

plot(x,y,'r','LineWidth',2)

subplot(212)

plot(x,e,'r','LineWidth',2)

ylabel('Error')

alireza mirzargar 2012-8-5

thank you, but i think you did'nt understand my question well. i know we must have some pre-process and post-proccess. i have problem in normalize data, especially out put scale out. for input we can use mapminmaxfunction. but i don't have any idea about out put processor.

Greg Heath 2012-8-8

All of the MLP functions (newff,newfit,newpr,fitnet,patternet,feedforwardnet)

AUTOMATICALLY use mapminmax. Therefore, you do not have to worry about it

unless you either want no normalization or standardization(zero-mean/unit-std)

请先登录，再进行评论。

Answer 2

Greg Heath 2012-7-31

1
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/44895-try-to-simulate-neural-network-in-matlab-by-myself#answer_55017

What was the range of x for training? How many input values? What random number seed? What training algorithm? What stopping rule? How many values of hidden nodes did you try? How many trials of weight initialization for each value of H? Where are the tabulations of MSE for training, validation and test sets?

For the design with the lowest MSEval, Tabulate x, t, y, e=t-y.

For useful examples, search

heath newff close clear Ntrials

Use fitnet instead of the obsolete newff.

3 个评论
显示 1更早的评论隐藏 1更早的评论

alireza mirzargar 2012-7-31

在 MATLAB Online 中打开

thank you for your response! i try to explain what i have done: my inputs are :

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 -21 -22 -23 -24 -25 -26 -27 -28 -29 -30 -31 -32 -33 -34 -35 -36 -37 -38 -39 -40 -41 -42 -43 -44 -45 -46 -47 -48 -49 -50 -51 -52 -53 -54 -55 -56 -57 -58 -59 -60 -61 -62 -63 -64 -65 -66 -67 -68 -69 -70 -71

and my outputs are :

0 1 4 9 16 25 36 49 64 81 100 121 144 169 196 225 256 289 324 361 400 441 484 529 576 625 676 729 784 841 900 961 1024 1089 1156 1225 1296 1369 1444 1521 1600 1681 1764 1849 1936 2025 2116 2209 2304 2401 2500 2601 2704 2809 2916 3025 3136 3249 3364 3481 3600 3721 3844 3969 4096 4225 4356 4489 4624 4761 4900 5041 1 4 9 16 25 36 49 64 81 100 121 144 169 196 225 256 289 324 361 400 441 484 529 576 625 676 729 784 841 900 961 1024 1089 1156 1225 1296 1369 1444 1521 1600 1681 1764 1849 1936 2025 2116 2209 2304 2401 2500 2601 2704 2809 2916 3025 3136 3249 3364 3481 3600 3721 3844 3969 4096 4225 4356 4489 4624 4761 4900 5041

then i used fitting tool network. with matrix rows. training is 70% validation is 15% and testing is 15% too. number of hidden neurons is 2. then in command lines i wrote this :

purelin(net.LW{2}*tansig(net.IW{1}*inputTest+net.b{1})+net.b{2})

where inputTest is 3 the result of this command is 16. but as i know it's not correct. it should be about 9. other informations :

my net.b[1] is : -1.16610230053776 1.16667147712026

my net.b[2] is : 51.3266249426358

and net.IW(1) is : 0.344272596370387 0.344111217766824

net.LW(2) is : 31.7635369693519 -31.8082184881063

i think i shared all information for creating some network like me. you can do it yourself. but if it's not complete please aware me. thank you

Greg Heath 2012-7-31

Why didn't you just enter

input = [0:71,-1:-1:-71} ;

target = input.^2 ; % Reserve "output" for net(input)

N =343

How, exactly, did you obtain the weights?

Post your code.

What is the NMSE = MSE/MSE00 or R^2 =1-NMSE for train, val & test?

alireza mirzargar 2012-7-31

In fact i'm a new user in Matlab so i don't have the information that you want, for example i don;t know what is N? i go to tool box of neural network in fitting tool, then i set the inputs and outputs. and then trains the datas. so i don't know how can i find NMSE = MSE/MSE00 or R^2 = 1 - NMSE or others. so Matlab sets the weights. and i found them with net.IW(1) and net.LW(2) thank you

请先登录，再进行评论。

try to simulate neural network in Matlab by myself

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

采纳的回答

3 个评论
显示 1更早的评论隐藏 1更早的评论

更多回答（1 个）

3 个评论
显示 1更早的评论隐藏 1更早的评论

另请参阅

类别

标签

Community Treasure Hunt

try to simulate neural network in Matlab by myself

0 个评论 显示 -2更早的评论隐藏 -2更早的评论

采纳的回答

3 个评论 显示 1更早的评论隐藏 1更早的评论

更多回答（1 个）

3 个评论 显示 1更早的评论隐藏 1更早的评论

另请参阅

类别

标签

Community Treasure Hunt

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

3 个评论
显示 1更早的评论隐藏 1更早的评论

3 个评论
显示 1更早的评论隐藏 1更早的评论