delay and sum beamforming

24 次查看（过去 30 天）
Dhananjay Singh
Dhananjay Singh 2019-3-28
评论： Dhananjay Singh 2019-3-29
I am new to matlab and am trying to acheive a simulation for delay and sum beamforming. My target is say there are two or more sensors placed in a line with 0.25m distance in between them. I am receiving a signal y(chirp signal) from some source which is placed at 45 degree with respect to the receivers. I am so far created an array for the generated signal which will be send towards the receivers. Now, i have to add respective delay to the antennas other than the refrence receiver. The delay value for the second receiver would be [(0.25*1)cos45]/343 and for 3rd receiver it would be [(0.25*2)cos45]/343 and so on. I am confused as to how to add this delay to the receiving signal's array. Further how will I then get the summed output and how to check steering of the array? please help
close all;
clc;
Fs=100e3;
tf=100e-3;
t=0:1/Fs:1; % Time, sampling frequency is 1kHz
% s = zeros(size(t));
% s = s(:); % Signal in column vector
% s(201:205) = s(201:205) + 1; % Define the pulse
% plot(t,s);
title('Pulse');xlabel('Time (s)');ylabel('Amplitude (V)');
f1=100;
f2=1000;
SLOPE=(f2-f1)/tf;
F=f1+SLOPE*t;
y=1*sin(2*pi*F.*t)';
carrierFreq = 100e3;
% here, the no. of receiving mic are 10
ula = phased.ULA('NumElements',5,'ElementSpacing',0.25);
ula.Element.FrequencyRange = [90e3 110e6];
%assuming signal arrives at the array at an angle of 45 in azimuth and 0 in elevation
inputAngle = [45; 0];
x = collectPlaneWave(ula,y,inputAngle,carrierFreq);
plot(t,x);

请先登录，再回答此问题。

回答（1 个）

Honglei Chen
Honglei Chen 2019-3-28
Have you tried phased.PhaseShiftBeamformer? That would perform delay and sum beamforming for you.
HTH
  5 个评论
显示 3更早的评论
Honglei Chen
Honglei Chen 2019-3-29
Could you clarify what you want? The beamformer already steered the array, that's how you get the beamformed output. I'm not sure what you mean by "not able to achieve electrical steering"
Dhananjay Singh
Dhananjay Singh 2019-3-29
oh, i didn't know that thanks. But can you tell me how to plot a power(db) vs angle scale which ccould show that the max. power is attained at 45degrees which is my angle

请先登录，再进行评论。

类别

在 Help Center 和 File Exchange 中查找有关 Signal Radiation and Collection 的更多信息

标签

产品

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by