Matlab connection with device by .net library by .dll

Question

franco otaola 2019-4-30

1
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/459349-matlab-connection-with-device-by-net-library-by-dll

评论： Guillaume 2019-5-2

Hello,

I just bought a hardware that is USB connected to the computer, with a software to control it.

The hardware is a captor, which has an acquisition frequency between 1-100hz. My problem is that from the software that they provide you can choose between 1 or 100 and some of my experiences need acquisition frequencies with values between them.

When I contacted the provider, they told me that if I need another frequency I will need to work around myself. The captor has a .dll (a .NET library) file that was created from the installation of the software, and from its application note there is a MODBUS communication protocol too.

From the application note, the library is a .NET assembly and any .net supporting programming language or program like C#, LabVIEW, IronPython, Visual Basic .net, or Mathworks MATLAB should be able to use it and fully control the detector. From what this phase and as I have no knowledge of the other languages/programs and I have used Matlab and I have a license to use it I thought I would follow that path.

The problem is that I haven’t work with a library before, and the application note only gives more information for C# and IronPython.

From what I read in the matlab forum, matlab needs a header file too (besides the library file .dll) where I don’t have anything else from the provider.

Is it that I am missing something or is there another way to work around?

If any essential information is missing, I excuse myself as it is not at all my field of work and I am doing this to be able to use a captor correctly.

Thanks in advance,

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Guillaume 2019-4-30

2
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/459349-matlab-connection-with-device-by-net-library-by-dll#answer_372961

在 MATLAB Online 中打开

It's actually fairly easy to call .Net functions from matlab. No you don't need a header file for Net assemblies (these don't exist in the .Net world), header files are for non .Net dlls (that use Windows API instead of .Net).

Instead for .Net you make the assembly visible to matlab with NET.addAssembly, e.g

net.addAssembly('C:\somewhere\somefolder\yourdll.dll');  %assuming the assembly has not been added to the GAC, otherwise use the GAC name

Then you use more or less the same code as you'd use in VB.Net, C#, or Python to interact with the assembly. Just instantiate a class and call its methods and properties. If you show an example in any language of the code you want to use we can probably show you the matlab equivalent.

6 个评论
显示 4更早的评论隐藏 4更早的评论

franco otaola 2019-4-30

在 MATLAB Online 中打开

THAAAAANKS, I was looking at net.addassembly actually.

the thing was that i didnt have any tokens for the license till half an hour ago so I just succed to open matlab.

here is everything I have in the docummentation for C#

All the code is in C#

Creationg object and connecting
Using clDigital;
…
Digital Detector = new Digital();
Detector.Port 15; //port name COM15
Detector.Open(); //opening the serial port
Detector.connect(); // connecting to the detector
If (Detector.IsConnected) // do something
Starting and Stopping a measurement
//startong a measurement
Detector.StartMethod();  
//Optional waiting until the measurement done 
While (Detector.IsMethodRunning)
{
// do something or just wait
}
//when the measurement donne it will be stopped automatically
//forcing the measurement to stop
Detector.StopMethod();
Reading measurement values
//getting the values
//measurement value in mV recorded while the excitation on
double OnValue;
//measurement value in mV recorded while the excitation off (background)
double OffValue;
 
//channel 1 E1D1 (OnValue1 and OfValue1)
OnValue = Detector.OnValue1;
OffValue = Detector.OffValue1;
//channel 2 E1D2 (OnValue2 and OfValue2)
OnValue = Detector.OnValue2;
OffValue = Detector.OffValue2;
//channel 3 E2D2 (OnValue3 and OfValue3)
OnValue = Detector.OnValue3;
OffValue = Detector.OffValue3;
Reading, modifying and saving settings
//example of reading and setting a parameter
// setting method cycle to 1
Detector.MethodCycles = 1;
//setting method type to 1
Detector.MethodType = 1;
//reading the detector temperature
double Temp = Detector.BoardTemperature;
//saving the settings permanently in memory
Detector.Save2NVRam();
//reading the detector infos
string SN = Detector.BoardSN;
closing connection and disconnecting
Detector.Disconnect();
Detector.Close();

ufff i just typed everything as I had an scanned copy only.

the thing is as you can see in the codes that i mentioned before is that I can not change the adquisition frequency with them for example ( and normally there would be more functions....)

I can imagine that this functions are defined inside the .dll file like "Detector.BoardTemperature".

when I opened the .dll in matlab it is a assembly of:

an assembly with others assemblies inside

[CodeBase ,FullName, EntryPoint, DefinedTypes, Evidence, PermissionSet, SecurityRuleSet, ManifestModule, ReflectionOnly, Location, imageRunTimeVersion, GlobalAssemblyCache, HostContext, IsDynamic, EscapedCodeBase, ExportedTypes, IsFullyTrusted, CustomAttributes, Modules]

and other matrix.

is there any way to inspect this to be able to "recover" all the functions of the library? even if they dont say what they do? (as the ones in C# where relative simple to understad what they were doing even without the comments....)

thanks a lot for the help, is super important to be able to continue my experiences.

best regards, franco

franco otaola 2019-5-2

okey, now I understand you better

if I do Test=NET.addAssembly('C:\Program Files (x86)\QIAGEN\FLDigital\clDigital.dll');

i have a "Test" assembly with as you said, it has differents properties ( assemblyHandle/Classes/Structures/Enums/GenericTypes/Interfaces/Delegates)

"One of these classes is called Detector, so when you do [...]" non is called Detector neither directly in Test neigther inside classes (Test.Classes), I think it is from that, that I wasnt following you.... i have all the classes different from what it was in C#

for example inside classes (Test.Classes) I have:('clDigital.Digital'/'clDigital.Digital+MethodDataEventArgs'/'clDigital.Digital+MethodDoneEventArgs'/'clDigital.Digital+ScanDataEventArgs'/'clDigital.Digital+ScanDataDoneEventArgs'/'clDigital.Digital+AutozeroDoneEventArgs')

is there anyway to see at least what the function gives me? if it is a double a matrix?

also then i can begin a function (that would be measure it) as i run the code and is connected to the pc, no?

is there anyway to explore more? as from the functions of C# I have they were evidents (what they were doing) but in the names I have no, E.G nothing is called temperature, or temp....

thanks

Guillaume 2019-5-2

在 MATLAB Online 中打开

I probably had a momentary case of blindness. Indeed, the original code was:

Digital Detector = new Digital();

The class name is therefore Digital. So the construction in matlab is

example = clDigital.Digital;

methodsview or methods with the '-full' option will allow you to see all the methods with all their input and output arguments (translated to matlab types):

methodsview('clDigital.Digital');  %displays in a an window
methods('clDigital.Digital', '-full');  %displays at the command prompt

Whatever function would allow you to change the frequency will be a method of that Digital class. The other classes listed in that assembly are just to encapsulate event data. It is also possible that the frequency is a property of the object:

properties('clDigital.Digital');  %displays at the command prompt. There's no pop-up equivalent.

请先登录，再进行评论。

Matlab connection with device by .net library by .dll

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

回答（1 个）

6 个评论
显示 4更早的评论隐藏 4更早的评论

另请参阅

类别

标签

产品

版本

Community Treasure Hunt

Matlab connection with device by .net library by .dll

0 个评论 显示 -2更早的评论隐藏 -2更早的评论

回答（1 个）

6 个评论 显示 4更早的评论隐藏 4更早的评论

另请参阅

类别

标签

产品

版本

Community Treasure Hunt

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

6 个评论
显示 4更早的评论隐藏 4更早的评论