Getting the complex antenna response in the antenna library?

Question

Yubei Xiong 2019-5-15

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/462322-getting-the-complex-antenna-response-in-the-antenna-library

评论： Yubei Xiong 2019-5-27

Is there a way of getting the complex antenna response (e-field magnitude as well as its phase) using the antenna library? This is possible with the phased library, by doing

aresp = phased.ArrayResponse('SensorArray',h);
resp = complex(zeros(181,361));
az = -180:1:180;
el = -90:1:90;
for m = 1:181
    resp(m,:) = aresp(fc,[az;el(m)*ones(1,361)]);
end

And I can then obtain the phase of the radiated field. Is there something that allows me to do the same thing in the antenna library?

Thanks.

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Honglei Chen 2019-5-16

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/462322-getting-the-complex-antenna-response-in-the-antenna-library#answer_375314

在 MATLAB Online 中打开

Is this what you mean?

https://www.mathworks.com/help/antenna/ref/ehfields.html

Or alternatively, if you want it to be in far field with input as an angle, you can always do

aresp = phased.ArrayResponse('SensorArray',phased.ConformalArray('Element',elem));
resp = complex(zeros(181,361));
az = -180:1:180;
el = -90:1:90;
for m = 1:181
    resp(m,:) = aresp(fc,[az;el(m)*ones(1,361)]);
end

where elem is the element.

HTH

3 个评论
显示 1更早的评论隐藏 1更早的评论

Yubei Xiong 2019-5-16

编辑：Yubei Xiong 2019-5-16

在 MATLAB Online 中打开

Thanks for the reference! I think this could help but in fact i am trying to get the antenna field repsonse, which is something that could be generated by this:

pattern(antenna,fc,'Type','efield');

but it only gives the magnitude of the field whereas I need both of its magnitude and its phase. Would you know how I could get the field phase and generate its pattern?

Currently, I am trying to do this by the ehfields which you have suggested, but the result does not match the magnitude pattern generated by the pattern call. It would be appreciated if someone could give me some directions / correct me if I did something wrong here.

% generate pattern corresponding to a desired AZEL mesh
AZ = -180:10:180;  % length N
EL = -90:5:90;     % length M
[AZ_,EL_] = meshgrid(deg2rad(AZ),deg2rad(EL));
[X,Y,Z] = sph2cart(AZ_,EL_,1);
p = [X(:)';Y(:)';Z(:)'];
[e,h] = EHfields(antenna,fc,p);
% combine XYZ fields
efield = zeros(1,size(e,2));
for j = 1:size(e,2)
    efield(j) = sum(e(:,j)) ;
end
% convert data to N by M matrix 
efieldGrid = vec2mat(efield,length(EL));
% plot custom pattern
phi = AZ';
theta = 90-EL;
figure(1)
subplot(1,2,1)
patternCustom(abs(efieldGrid),theta,phi,...
            'CoordinateSystem','polar');
title('Efield Magnitude Pattern');
subplot(1,2,2)
patternCustom(angle(efieldGrid),theta,phi,...
            'CoordinateSystem','polar');
title('Efield Phase Pattern');

I got this for a dipole antenna, which is clearly incorrect.

Thanks

Honglei Chen 2019-5-17

Have you tried my alternative code? That should give you both magnitude and phase. Does that help?

Yubei Xiong 2019-5-27

The code you gave was based on the phased library. My question is to ask how I could do the same thing in the antenna library.

请先登录，再进行评论。

Getting the complex antenna response in the antenna library?

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

回答（1 个）

3 个评论
显示 1更早的评论隐藏 1更早的评论

另请参阅

类别

标签

产品

版本

Community Treasure Hunt

Getting the complex antenna response in the antenna library?

0 个评论 显示 -2更早的评论隐藏 -2更早的评论

回答（1 个）

3 个评论 显示 1更早的评论隐藏 1更早的评论

另请参阅

类别

标签

产品

版本

Community Treasure Hunt

WeChat

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

3 个评论
显示 1更早的评论隐藏 1更早的评论