How preamble signal is generated in Massive MIMO Hybrid Beamforming

Question

Emad 2019-5-24

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/463810-how-preamble-signal-is-generated-in-massive-mimo-hybrid-beamforming

评论： Rochelle Thomas 2023-7-10

In Massive MIMO Hybrid Beamforming, a preamble signal is sent over all transmitting antenna elements for CSI. It uses the function named helperGenPreamble.m which is designed for 256 carriers. What is the theory behind the choice of Frequency subcarrier tones namely ltfSC. How can we extend it to 1024 carriers?

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Amit Kansal 2019-6-17

1
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/463810-how-preamble-signal-is-generated-in-massive-mimo-hybrid-beamforming#answer_379590

The sequence selected in helperGenPreamble.m is based on the Long Training Field (LTF) used in WLAN (802.11) standards. It is basically a set of tones at the subcarriers that are known (pre-designed) at both the transmit and receive ends.

Extensions to other FFT sizes should be straightforward. Just update the ltfSC vector values directly to represent the subcarriers that carry data, which would be hence used for sounding purposes.

hope this helps,

Amit