Empty thermal liquid tank

2 次查看（过去 30 天）
Sadeer Al-Rawashdeh
评论： Sadeer Al-Rawashdeh 2019-7-12
how to have an empty thermal liquid tank with a volume of 0.357 m3 and a radius of 37 cm??
Thank you

请先登录，再回答此问题。

回答（1 个）

Sebastian Castro
Sebastian Castro 2019-7-11
Have you looked into Simscape Fluids? They have a built in Thermal Liquid tank block you can parameterize based on specs like the ones you mentioned.
https://www.mathworks.com/help/physmod/hydro/ref/tanktl.html
The only work you may need to do is convert the radius to a cross-sectional area parameter (Area = pi*R^2).
- Sebastian
  3 个评论
显示 1更早的评论
Sebastian Castro
Sebastian Castro 2019-7-11
And did you set the initial conditions in the Variables tab to start the tank empty? Because the default values are non-empty so that makes sense unless you change it.
Sadeer Al-Rawashdeh
Sadeer Al-Rawashdeh 2019-7-12
Yess but if you do so, you'll end up and error about the tank level that it is lower than the inlet height ! how can i fix that?

请先登录，再进行评论。

类别

在 Help Center 和 File Exchange 中查找有关 Elements 的更多信息

标签

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by