Can't get RTL-SDR to work on 2017a on Win10... 'Error code -12'

14 次查看（过去 30 天）

Jay K 2019-8-19

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/476769-can-t-get-rtl-sdr-to-work-on-2017a-on-win10-error-code-12

评论： Carlos Aris 2022-1-5

I'm trying to get an RTL-SDR working with Matlab 2017a on Win10. My RTL-SDR works fine with both SDRSharp and CubicSDR so the hardware is ok and I think I have the drivers set up correctly (I have WinUSB installed for both the Bulk-In interfaces of the RTL-SDR). My particular dongle is a 'NooElec NESDR Smart v4'. When I go through the Matlab setup for the RTL-SDR Hardware Support package and click 'list devices', or when I just enter 'sdrinfo' on the Matlab console I get 'Error code -12'. Any idea what this means or how to fix it?

3 个评论
显示 1更早的评论隐藏 1更早的评论

Md Anowar Hossain 2020-5-20

Hello Jay, I am facing a problem on Pluto-SDR. After the installation of Communication Support package toolbox for Adalm Pluto SDR, when I reach to hardware setup option I get the error message "The libiio installation directory was not found. Try reinstalling the support package". Pls note that: I am using MTALAB 2019a.

Pls help.

Jorge PARDIÑAS-MIR 2020-9-15

Did you resolve the problem Jay K? I'm having the same problem.

请先登录，再进行评论。

请先登录，再回答此问题。

采纳的回答

Edwin Wilson 2020-9-25

3
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/476769-can-t-get-rtl-sdr-to-work-on-2017a-on-win10-error-code-12#answer_500386

I found the fix after hours of scouring the Internet!

Install zadig -> Run it as administrator

In Options Check List All Devices >> Uncheck Ignore Hubs or Composite Devices

In drop down menu select the device saying RTL2838UHIDIR >> Click Replace Driver

Voila!

For reference : https://www.rtl-sdr.com/forum/viewtopic.php?f=7&t=1797

3 个评论
显示 1更早的评论隐藏 1更早的评论

Heitor Vinicius Vieira do Nascimento 2021-12-3

Thank you very much!!! I was losing my mind trying to fix this and finally I found your answer. It will help me with the rtl class im attending this semester.