Simscape tablelookup input value

11 次查看（过去 30 天）
Mahmoud Seboui
Mahmoud Seboui 2019-9-4
回答： Shubham Kashyap 2020-6-10
I'm trying to create a custom simscape component and I'm facing problem using "tablelookup".
the component has n spatial section. A physical parameter "y" of each section should be determined using "tablelookup" based on user defined values in the parameter section.
a very simplified code to reproduce the case is as follow:
component Vect
outputs
f = 0;
end
parameters
u1 = [1 1 ];
u2 = [1 1.5 ];
end
parameters(Access=private)
x1d = [1 2 3 4];
x2d = [1 2 3];
y = [1 2 3; 3 4 5; 5 6 7; 7 8 9];
end
equations
f == tablelookup(x1d, x2d, y, u1, u2, interpolation = linear, extrapolation = nearest);
end
end
I'm getting the following error while compiling:
Error compiling Simscape network for model sim_Vect.
Caused by:
['sim_Vect/Simscape Component']: Function, tablelookup, is wrong. Please check 1)
whether input data points have correct sizes; 2) query values are scalar; 3)
query values and table data have the commensurate units; and 4) constants or
compile time parameters are passed to interpolation and extrapolation argument. In Vect (line 19)
Argument 1 = [1 2 3 4]
Argument 2 = [1 2 3]
Argument 3 = [4x3 double]
Argument 4 = [1 1]
Argument 5 = [1 1.5000]
x1d = [1 2 3 4]
x2d = [1 2 3]
y = [4x3 double]
u1 = [1 1]
u2 = [1 1.5000]
Component:Simulink | Category:Model error
My problem is that it seems to me like tablelookup can only work with single input value.
The point is that the number of sections n is probably unknown and even if's known it could be very big(100 to 1000 entry) so I can't call tablelookup for every single section separatly.
As I'm not very experienced with simscape, I might be missing something or misunderstanding the tablelook up function.
So could you please help me to realise this functionality or share a workarround?

请先登录，再回答此问题。

回答（2 个）

J Chen
J Chen 2019-9-6
Several options: 1) use the Simscape built-in PS Lookup Table (2D) block instead of a custom block. 2) study the example here. 3) build the component with Simulink blocks and use PS-Simulink converters to interface with your Simscape model.
  2 个评论
Mahmoud Seboui
Mahmoud Seboui 2019-9-9
Hi J Chen,
Thank you for your response!
Actually this is not the whole code but part of it, so my final goal is not creating a lookup table but to use it within my component.
I already have the simulink model (of the component) and I use it in the way you mention in (3) but I wanted to create the component in simscape with the hope to increase the performace of the whole model.
J Chen
J Chen 2019-9-11
I think the problem might be that the u1 and u2 in the following command need to be scaler. They can't be vectors as in your code.
f == tablelookup(x1d, x2d, y, u1, u2, interpolation = linear, extrapolation = nearest);
The error message (2) seems to support my assumption.

请先登录，再进行评论。

Shubham Kashyap
Shubham Kashyap 2020-6-10
In the ‘tablelookup’ documentation, it specifies:
“For two-dimensional table lookup, yd must be a matrix, with the size matching the dimensions defined by the input data sets. For example, if x1d is a 1-by-m array, and x2d is a 1-by-n array, then yd must be an m-by-n matrix.”
tablelookup(x1d, x2d, yd, x1, x2, interpolation = linear|cubic|spline, extrapolation = linear|nearest)
This means that m x n matrix is referenced by:
A) First input lookup data (x1d) references rows (m) of a lookup table.
B) and the second input lookup data (x2d) references the column (n) of a lookup table.
For example, the proper input order using 'tablelookup' function is shown below:
density_out = tablelookup(B.temperature, B.pressure, B.density, T_out, P_out, interpolation = spline, extrapolation = nearest);
For the code above, since m x n is ‘pressure’ x ‘temperature’:
A) x1d – should have input lookup data of pressure data
B) x2d – should have input lookup data of temperature data.
Corrective Methods:
A) Enter the input lookup data set as per order mentioned above.
B) OR transpose the lookup table.
Please refer to following documentation on ‘tablelookup’ for more information on interpolation method:
http://www.mathworks.com/help/physmod/simscape/lang/tablelookup.html

类别

在 Help Center 和 File Exchange 中查找有关 Equations 的更多信息

标签

产品

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by