Patch antenna with multiple feeds with independent voltage and phases

Question

xadu 2019-9-7

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/479302-patch-antenna-with-multiple-feeds-with-independent-voltage-and-phases

评论： xadu 2019-9-24

I'm using the antenna toolbox and would like to create a custom antenna element which consists of two patches above a ground plane. I have no problem in creating the geometry and the final element using pcbStack (this tutorial helped). However, even though I can specify multiple feeds using pcbStack's FeedLocation property, I can only specify one value each for the voltage and phase (using FeedVoltage and FeedPhase, respectively). Is it possible to specify independent voltage and phases?

Thanks!

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Da Huang 2019-9-24

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/479302-patch-antenna-with-multiple-feeds-with-independent-voltage-and-phases#answer_393302

Hi udax,

if you setup the FeedLocations property properly in pcbStack object. Then you shall be able to set the FeedVoltage and FeedPhase as vector in the same object. Please see example below for a two feed patchMicrostripEnotch, which has independent feed voltage and phase.

p = patchMicrostripEnotch;

p = pcbStack(p);

p.FeedLocations = [-0.0034 0 1 3;0.0034 0 1 3];

p.FeedVoltage = [1,2];

p.FeedPhase = [0,90];

p.pattern(1e9);