Plc simulink coder supports RSLogix 5000 compactlogix plc or only the controllogix

Question

wissam zeineldine 2019-10-14

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/485287-plc-simulink-coder-supports-rslogix-5000-compactlogix-plc-or-only-the-controllogix

回答： Sri Kapali 2021-2-18

Does the Plc simulink coder supports RSLogix 5000 compactlogix plc or only the controllogix plc

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Sri Kapali 2021-2-18

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/485287-plc-simulink-coder-supports-rslogix-5000-compactlogix-plc-or-only-the-controllogix#answer_626927

Hello,

I understand that you are asking whether the code generated by Simulink PLC Coder supports ControlLogix PLCs only or CompactLogix PLC as well.

The answer is that Simulink PLC Coder generates code for both RSLogix5000 IDEs and Studio5000 IDEs. Bot these IDEs can be used to program CompactLogix and ControlLogix PLCs. The IDE to use depends on the firmware version of the PLCs. For example, if the CompactLogix PLC has firmware version 32, you will generate code for the Studio5000 IDE. If the ControlLogix PLC has firmware version 22, you will generate code for the RSLogix5000 IDE.

For more information, see https://www.mathworks.com/help/plccoder/ug/rockwell-automation-rslogix-requirements.html?searchHighlight=RSLogix5000%20version&s_tid=srchtitle#mw_4c544021-975b-4bf5-bc8f-c35f58f869dc.

For a list of supported IDEs, see https://www.mathworks.com/help/plccoder/gs/supported-ide-platforms.html?searchHighlight=RSLogix5000%20version&s_tid=srchtitle.