i am sending the data from RTC through arduino to thingspeak. the data sent is shown in the serial monitor but cant see any graph on thingspeak.

5 次查看（过去 30 天）
dipesh gupta
dipesh gupta 2019-10-25
评论： Christopher Stapels 2019-10-25
#include <SoftwareSerial.h> //Software Serial library
#include <Wire.h>
#include <TimeLib.h>
#include <DS1307RTC.h>
SoftwareSerial espSerial(2, 3); //Pin 2 and 3 act as RX and TX. Connect them to TX and RX of ESP8266
#define DEBUG true
String mySSID = "MyWiFi "; // WiFi SSID
String myPWD = "1234"; // WiFi Password
String myAPI = "XXXYYY"; // API Key
String myHOST = "api.thingspeak.com";
String myPORT = "80";
String myFIELD1 = "field1";
String myFIELD2 = "field2";
String myFIELD3 = "field3";
void setup() {
Serial.begin(9600);
espSerial.begin(115200);
espData("AT+RST", 1000, DEBUG); //Reset the ESP8266 module
espData("AT+CWMODE=1", 1000, DEBUG); //Set the ESP mode as station mode
espData("AT+CWJAP=\""+ mySSID +"\",\""+ myPWD +"\"", 1000, DEBUG); //Connect to WiFi network
while (!Serial) ; // wait for serial
delay(200);
Serial.println("DS1307RTC Read Test");
Serial.println("-------------------");
}
void loop()
{
tmElements_t tm;
if (RTC.read(tm)) {
Serial.print("Ok, Time = ");
print2digits(tm.Hour);
Serial.write(':');
print2digits(tm.Minute);
Serial.write(':');
print2digits(tm.Second);
Serial.print(", Date (D/M/Y) = ");
Serial.print(tm.Day);
Serial.write('/');
Serial.print(tm.Month);
Serial.write('/');
Serial.print(tmYearToCalendar(tm.Year));
Serial.println();
} else {
if (RTC.chipPresent()) {
Serial.println("The DS1307 is stopped. Please run the SetTime");
Serial.println("example to initialize the time and begin running.");
Serial.println();
} else {
Serial.println("DS1307 read error! Please check the circuitry.");
Serial.println();
}
delay(9000);
}
String hrData = "GET /update?api_key="+ myAPI +"&"+ myFIELD1 +"="+String(tm.Hour);
espData("AT+CIPMUX=1", 1000, DEBUG); //Allow multiple connections
espData("AT+CIPSTART=0,\"TCP\",\""+ myHOST +"\","+ myPORT, 1000, DEBUG);
espData("AT+CIPSEND=0," +String(hrData.length()+4),1000,DEBUG);
espSerial.find(">");
espSerial.println(hrData);
Serial.print("HOUR: ");
print2digits(tm.Hour);
espData("AT+CIPCLOSE=0",1000,DEBUG);
String minuData = "GET /update?api_key="+ myAPI +"&"+ myFIELD2 +"="+String(tm.Minute);
espData("AT+CIPMUX=1", 1000, DEBUG); //Allow multiple connections
espData("AT+CIPSTART=0,\"TCP\",\""+ myHOST +"\","+ myPORT, 1000, DEBUG);
espData("AT+CIPSEND=0," +String(minuData.length()+4),1000,DEBUG);
espSerial.find(">");
espSerial.println(minuData);
Serial.print("MINUTE: ");
print2digits(tm.Minute);
espData("AT+CIPCLOSE=0",1000,DEBUG);
String secData = "GET /update?api_key="+ myAPI +"&"+ myFIELD3 +"="+String(tm.Second);
espData("AT+CIPMUX=1", 1000, DEBUG); //Allow multiple connections
espData("AT+CIPSTART=0,\"TCP\",\""+ myHOST +"\","+ myPORT, 1000, DEBUG);
espData("AT+CIPSEND=0," +String(secData.length()+4),1000,DEBUG);
espSerial.find(">");
espSerial.println(secData);
Serial.print("SECOND: ");
print2digits(tm.Second);
espData("AT+CIPCLOSE=0",1000,DEBUG);
delay(2000);
}
String espData(String command, const int timeout, boolean debug)
{
Serial.print("AT Command ==> ");
Serial.print(command);
Serial.println(" ");
String response = "";
espSerial.println(command);
long int time = millis();
while ( (time + timeout) > millis())
{
while (espSerial.available())
{
char c = espSerial.read();
response += c;
}
}
if (debug)
{
//Serial.print(response);
}
return response;
}
void print2digits(int number) {
if (number >= 0 && number < 10) {
Serial.write('0');
}
Serial.print(number);
}
  1 个评论
Christopher Stapels
Christopher Stapels 2019-10-25
If your channel is public, can you share the channel number and we can look at the data? If not you can export the data and see what is being sent to ThingSpeak. It may be interpreted as a string intead of a number, and that is why its not showing up on the plot.

请先登录，再进行评论。

请先登录，再回答此问题。

回答（1 个）

Hans Scharler
Hans Scharler 2019-10-25
I would start by combining all of the update requests into one request.
String secData = "GET /update?api_key="+ myAPI +"&"+ myFIELD2 +"="+String(tm.Second)+"&"+ myFIELD3 +"="+String(tm.Second);

社区

更多回答在  ThingSpeak Community

类别

在 Help Center 和 File Exchange 中查找有关 Read Data from Channel 的更多信息

标签

产品

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by