how can i modeling the desiccant system in simscape?

Question

khaled alawwad 2019-11-16

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/491427-how-can-i-modeling-the-desiccant-system-in-simscape

评论： amir djaouadi 2023-7-3

hello

i have to modeling & simulation the desiccant system but i can't understand where can i found and modeling the desiccant system..

i'm looking for help plz.

2 个评论
显示无隐藏无

Meriem M'hamdi 2020-5-31

hello

plz have you find anything about this problem or did you solve it ??

Yifeng Tang 2020-8-17

Hi Khaled,

I assume you are using the Moist Air domain to model the desiccant system. The simplest implemetation I can think of is to use a pipe, with moistrue and trace gas source set to "controlled", and connect the pipe to a moisture source (see below). Then you can put sensors around and use either PS domain or Simulink or MATLAB function block to perform calculation of the water removal and send that to the moisture source. You probably also need to add some additional friction to the pipe to get the right pressure drop.

请先登录，再进行评论。

请先登录，再回答此问题。