Why subplot is not working?

17 次查看(过去 30 天)
Darkhan Sheldebayev
clear
clf
clc
axis equal
hold on
velocity = input('Enter your constant velocity for v: ');
while isnan(velocity) % If your input is not a number
velocity = input('Your value is not a number.Please input your velocity for v:','s'); % Enter new input for c
end
while velocity == 0
disp('Your velocity must not be zero');
velocity = input('Enter enter true value of constant velocity for v: ');
while isnan(velocity) % If your input is not a number
velocity = input('Your value is not a number.Please input your velocity for v:','s'); % Enter new input for c
end
end
Height = input('Enter your height to explorers for H: ');
while isnan(Height) % If your input is not a number
Height = input('Your value is not a number.Please input your height for H:','s'); % Enter new input for c
end
while Height == 0
disp('Your height must not be zero');
Height = input('Enter true value of height for H: ');
while isnan(Height) % If your input is not a number
Height = input('Your value is not a number.Please input your height for H:','s'); % Enter new input for c
end
end
d = input(' Write your distance from the plane to explorers for d: ');
while isnan(d)
d = input(' Write your true distance from the plane to explorers for d: ');
end
while d == 0
disp('You lost your dropping point');
d = input(' Write your true distance from the plane to explorers for d: ');
while isnan(distance)
d = input(' Write your true distance from the plane to explorers for d: ');
end
end
v = velocity;
h = Height;
g=9.81;
t = sqrt(2*h/g);
s = v*t;
d_dp = d-s;
t_dp = d_dp/v;
t_full = d/v;
while d > s
figure(1);
subplot(2,1,1);
line([0 d+500],[0 0]);
plot(d,0,'og');
for i = 0:t_dp/10:t_dp
x=(i*v);
plot(x,h,'dr');
plot(x,h,'*k');
pause(0.5);
end
subplot(2,1,2);
x0=x;
plot(x0,h,'og');
plot([x0 x0],[0 h],'--c');
for i = 0:t/10:t
x=(i*v+x0);
y=(h-g*i^2/2);
plot(x,h,'dr');
plot(x,y,'*k');
pause(0.5);
end
xlabel('Distance','Color','r');
ylabel('Height','Color','r');
end
  2 个评论
Adam Danz
Adam Danz 2019-12-4
编辑:Adam Danz 2019-12-4
It's not clear what you're asking or what's not working. Code is helpful but when there's a lot of code and no explanation of what's wrong, we don't know where to start. Minimize the time we need to spend helping you by clearing defining the problem.
Check out these tips on how to maximized the help you get in this forum
Stephane
Stephane 2019-12-4
If you don't make use of subplot, but use 'plot' instead in different figures. Does it work?

请先登录,再进行评论。

回答(1 个)

Mahesh Taparia
Mahesh Taparia 2019-12-9
Hi Darkhan,
It seems the condition (d > s’) which you put in while loop is not satisfied, so the subplot command is not executed. Select the value of ‘d’ and ‘s’ such that the condition should satisfy in order to plot your values.
For example, set v=5, H=6 and d=25, you will get your required plot.
Hope it will help.

标签

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by