code that make matrix contain 30 ten pounds
1 次查看(过去 30 天)
显示 更早的评论
i want to write a code in which i will enetr about 30 random ten pounds ,, and i need a matrix that can detect whichof the following ten pounds would fall the test of real RGB( red colour of actual 10mten ponds, blue colour, green colour) can any one help me pleaseee?
Counterfeit currency detection using MATLAB
0 个评论
回答(1 个)
BhaTTa
2024-6-14
To create a MATLAB code for detecting counterfeit £10 notes based on RGB color values, you'll need to follow several steps. This solution assumes you have a way to input or measure the RGB values of the £10 notes you want to test. The actual RGB values for genuine £10 notes must be known or determined through analysis of genuine notes. For the purpose of this example, let's assume hypothetical RGB values for a genuine £10 note are (R: 100, G: 150, B: 200). In practice, these values should be determined through careful analysis of multiple genuine notes to account for variations in printing.
Here's a basic approach to designing such a system:
Step 1: Define Genuine £10 Note RGB Values
First, define the RGB values that represent a genuine £10 note. These values should be determined through analysis of genuine notes.
% Define the RGB values for a genuine £10 note
genuineRGB = [100, 150, 200]; % Example values (R, G, B)
Step 2: Input the RGB Values of the Notes to Be Tested
You mentioned entering about 30 random £10 notes for testing. For simplicity, let's input these RGB values into a matrix where each row represents a note, and the columns represent the R, G, and B values, respectively.
% Example input for 30 notes (randomly generated for this example)
% In practice, you would replace this with actual measured values
testRGB = randi([0, 255], 30, 3); % Generating random RGB values for 30 notes
Step 3: Compare Each Note's RGB Values to the Genuine Values
Determine a threshold for how much deviation from the genuine RGB values is acceptable. This threshold can be adjusted based on how strict or lenient you want the detection to be.
% Threshold for deviation in RGB values
threshold = 20; % Allowable deviation in each RGB component
% Initialize a logical array to mark each note as genuine (1) or counterfeit (0)
results = zeros(size(testRGB, 1), 1);
% Loop through each note and compare its RGB values to the genuine RGB values
for i = 1:size(testRGB, 1)
deviation = abs(testRGB(i, :) - genuineRGB);
if all(deviation <= threshold)
results(i) = 1; % Mark as genuine
else
results(i) = 0; % Mark as counterfeit
end
end
Step 4: Display the Results
Finally, display which notes passed the test and which ones are suspected to be counterfeit.
for i = 1:length(results)
if results(i) == 1
fprintf('Note %d: Genuine\n', i);
else
fprintf('Note %d: Counterfeit\n', i);
end
end
0 个评论
另请参阅
类别
在 Help Center 和 File Exchange 中查找有关 Genomics and Next Generation Sequencing 的更多信息
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!