Position estimation using inertial sensor (dead reckoning)

32 次查看（过去 30 天）

显示更早的评论

Swapnil Sayan Saha 2020-1-13

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/500029-position-estimation-using-inertial-sensor-dead-reckoning

回答： Brian Fanous 2020-8-19

Is there a filter that takes in 6DOF/9DOF IMU data and outputs position and orientation without requring GPS?

5 个评论
显示 3更早的评论隐藏 3更早的评论

Meg Noah 2020-1-14

I don't know if these will post - might be marked as spam:

Extended Kalman Filter on Git Hub

https://github.com/amelim/EKF-Slam

Swapnil Sayan Saha 2020-1-14

thanks.

请先登录，再进行评论。

请先登录，再回答此问题。

回答（1 个）

Brian Fanous 2020-8-19

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/500029-position-estimation-using-inertial-sensor-dead-reckoning#answer_482168

Hi Swapril

What your are trying to do is called “dead reckoning” and is not generally recommended with just an accelerometer and gyroscope. There are various detailed descriptions about it on the web, but NXP’s sensor fusion manual describes an experiment in section 2.8 here. If you have other non-GPS sensors that measure position, it’s possible to use the correct method on one of the insfilters to achieve your goal.