Plot and zoom in - axis labels doesnt work?

6 次查看（过去 30 天）
I G
I G 2020-1-28
编辑： Adam 2020-1-28
I am using nxt code to make my plot:
figure;
set(0,'defaulttextinterpreter','latex');
set(0, 'defaultAxesTickLabelInterpreter','latex');
set(0, 'defaultLegendInterpreter','latex');
set(gca,'FontSize',16);
xlabel('\textit{z}','FontSize',16,'Interpreter', 'LaTeX');
xlabh = get(gca,'xlabel');
set(xlabh, 'HorizontalAlignment','center');
xpos = get( xlabh , 'position' );
ylabel('\textit{p}','FontSize',16,'Interpreter', 'LaTeX');
ylabh = get(gca,'ylabel');
ypos = get( ylabh , 'position' );
set(ylabh, 'VerticalAlignment','middle', 'Rotation',0);
set(gca,'Units','normalized');
set(gca,'box','on');
set(gcf, 'PaperUnits', 'centimeters', 'PaperSize', [7, 7]);
xpos1 = [0.1 5 0];
ypos1 = [-0.08 4.8 0];
set( xlabh , 'position' , xpos1 );
set( ylabh , 'position' , ypos1 );
txtRee = ['$Re_e=\,\,$', num2str(Ree)];
txteps = ['$\varepsilon=\,\,$', num2str(eps)];
txtRi = ['$R_i=\,\,$', num2str(ri)];
plot(z, p3uk, 'k:', 'LineWidth', 2);
hold on;
plot(z, pns1, 'k--', 'LineWidth', 1.5);
hold on;
plot(z, pns2, 'k-.', 'LineWidth', 1.5);
txt = {txtRee, txteps, txtRi};
text(0.4, 5.2, txt, 'FontSize', 16, 'Interpreter', 'LaTeX');
legend({'(?)', '$\mathcal{O}(Kn)$ [3]', '$\mathcal{O}(Kn^2)$ [3]'},'FontSize',16,'Interpreter', 'latex')
legend boxon;
% zoom
axes('position',[0.2 0.2 0.3 0.25]); % four-element vector of the form [left bottom width height]
box on; % put box around new pair of axes
indexOfInterest3 = (z < 0.51) & (z > 0.5); % range of t near perturbation
plot(z(indexOfInterest3),pns1(indexOfInterest3),'k--', 'LineWidth', 1.5); % plot on new axes
hold on;
plot(z(indexOfInterest3),pns2(indexOfInterest3), 'k-.', 'LineWidth', 1.5); % plot on new axes
hold on;
plot(z(indexOfInterest3),p3uk(indexOfInterest3), 'k:', 'LineWidth', 2); % plot on new axes
axis tight
But my commands
xpos1 = [0.1 5 0];
ypos1 = [-0.08 4.8 0];
set( xlabh , 'position' , xpos1 );
set( ylabh , 'position' , ypos1 );
does not work, it is something like Matlab put something else over labels and my final plot is without axis labels. I tried to change place of that part of code, but it is the same, or when I put it after my normal plot it looks like Matlab forget for that plot and it remmebres only zommed part of plot.
What should I do?
  3 个评论
显示 1更早的评论
I G
I G 2020-1-28
Are you sure? That what you wrote is label postiion for xlabel and ylabel,why it should have width and height elements? I always used as I wrote in my code [x y z] and it worked until now?
On your way I got this error:
Error using matlab.graphics.primitive.Text/set
While setting the 'Position' property of 'Text':
Value must be a 2 or 3 element vector of numeric or logical type
Adam
Adam 2020-1-28
编辑：Adam 2020-1-28
I can't run your code beyond the lines you mention because Ree (and some subsequent variables) is not defined.
However, at the point where the code you mention is your axes limits are 0 to 1 in both x and y so trying to place labels with x or y values like 4.8 or 5 places them miles off the figure. A value of 0 or 1 will place the labels at either end of the axes, with values inbetween to place them in the middle, but anything above 1 is off the axes, likewise values < 0 are also off the axes, which is generally what you want, but only with values like -0.1 so they are alongside the axis ticks, as you have there for x. The y values are far too large though for the range of the axes at that point in the code. I don't know what happens to the axes limits subsequently since I don't have the data to run the rest of the code.
This is because, by default, the units used are data units (i.e. the same as on the axes). You can also change the 'Units' property of the label object if you find it easier to place the labels in normalized, pixels, etc instead.
3-element positions are what are needed though.

请先登录，再进行评论。

请先登录，再回答此问题。

回答（0 个）

类别

在 Help Center 和 File Exchange 中查找有关 Annotations 的更多信息

标签

产品


版本

R2016a

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by