ADI RF SOM (2x2) Carrier Support in Communications Toolbox Support Package for Xilinx Zynq-Based Radio

5 次查看（过去 30 天）
Anton Zhivchikov
Anton Zhivchikov 2020-2-3
评论： Francisco Salomon 2020-2-6
Is ADRV-PackRF (https://wiki.analog.com/resources/eval/user-guides/pzsdr/carriers/packrf) Supported in Communications Toolbox Support Package for Xilinx Zynq-Based Radio?
ADRV-PackRF is a developing kit based on ADI RF SOM (2x2).
I tried to run the kit according to the instructions.
I create boot SD card ( as described in https://www.mathworks.com/help/supp=
ortpkg/xilinxzynqbasedradio/ug/manual-host-radio-hardware-setup.html )
When I uboot my equipment i see in Zynq UART console:
#############
U-Boot 2017.01 (Aug 26 2019 - 10:27:06 +0100)
Model: Zynq PicoZed SDR2 Board
Board: Xilinx Zynq
I2C: ready
DRAM: ECC disabled 1 GiB
MMC: sdhci@e0100000: 0 (SD)
reading uboot.env
In: serial@e0001000
Out: serial@e0001000
Err: serial@e0001000
Model: Zynq PicoZed SDR2 Board
Board: Xilinx Zynq
Net: ZYNQ GEM: e000b000, phyaddr 7, interface rgmii-id
eth0: ethernet@e000b000
Hit any key to stop autoboot: 0
Device: sdhci@e0100000
Manufacturer ID: 74
OEM: 4a60
Name: USD
Tran Speed: 50000000
Rd Block Len: 512
SD version 3.0
High Capacity: Yes
Capacity: 14.9 GiB
Bus Width: 4-bit
Erase Group Size: 512 Bytes
reading uEnv.txt
** Unable to read file uEnv.txt **
Loading bitstream from SD/MMC/eMMC to RAM..
Device: sdhci@e0100000
Manufacturer ID: 74
OEM: 4a60
Name: USD
Tran Speed: 50000000
Rd Block Len: 512
SD version 3.0
High Capacity: Yes
Capacity: 14.9 GiB
Bus Width: 4-bit
Erase Group Size: 512 Bytes
reading system.bit
13321511 bytes read in 1113 ms (11.4 MiB/s)
design filename =3D "system_top;UserID=3D0XFFFFFFFF;Version=3D2018.2"
part number =3D "7z035ifbg676"
date =3D "2019/04/03"
time =3D "23:38:59"
bytes in bitstream =3D 13321404
zynq_align_dma_buffer: Align buffer at 10006b to fff80(swap 1)
Copying Linux fro
###############

请先登录，再回答此问题。

采纳的回答

Francisco Salomon
Hello Anton,
The ADRV-PackRF is not supported by Mathworks's hardware support packages.
Please have a look on the ADI Transceiver Toolbox to see if that suits you:
https://www.mathworks.com/matlabcentral/fileexchange/72645-analog-devices-inc-transceiver-toolbox
Thanks,
Francisco

更多回答（0 个）

类别

在 Help Center 和 File Exchange 中查找有关 Xilinx FPGA and SoC Devices 的更多信息

标签

产品


版本

R2019b

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by