0 个投票

how to plot this two equatio and the resutant output is shown in the figure

请先登录，再回答此问题。

 采纳的回答

Birdman
Birdman 2020-3-26

0 个投票

Try this:
alpha=1;Wcr=10;
syms w
Mag(w)=piecewise(w<Wcr,20,w>=Wcr,-26.144+20*alpha*log(w));
w=logspace(-1,3,1000);
semilogx(w,Mag(w));grid on;xlabel('Frequency');ylabel('dB')

9 个评论
显示 7更早的评论 隐藏 7更早的评论

Irshad Baruah
Irshad Baruah 2020-3-26
its showing error in
Error in matlab_program (line 5)
Mag(w)=piecewise(w<Wcr,20,w>=Wcr,-26.144+20*alpha*log(w));
Irshad Baruah
Irshad Baruah 2020-3-26
this is the paper , i want to find the fractional zero part i.e figure 1
Birdman
Birdman 2020-3-26
which version of MATLAB are you using?
Irshad Baruah
Irshad Baruah 2020-3-26
Matlab R2013a
Birdman
Birdman 2020-3-26
ok then, try this:
hold off;
alpha=1;Wcr=10;
w1=logspace(-1,log10(Wcr),1000);w2=logspace(log10(Wcr),3,1000);
Mag1=20*ones(1,numel(w1));Mag2=@(w2) 20*alpha*log10(w2);
semilogx(w1,Mag1);hold on;semilogx(w2,Mag2(w2));grid on;xlabel('Frequency');ylabel('dB')
Irshad Baruah
Irshad Baruah 2020-3-27
Thank you Birdman it's working if I face any problem I let you know again thanks for helping me out
Birdman
Birdman 2020-3-27
You are welcome. You can accept the answer if it helped.
Irshad Baruah
Irshad Baruah 2020-3-27
alpha value should be fractional,in this code if i chang the alpha value the graph got cut
Birdman
Birdman 2020-3-30
Hello Irshad,
Sorry for the late reply. There has been something in the code that I missed, so the following code is working:
hold off;
alpha=0.09;Wcr=10;
w1=logspace(-1,log10(Wcr),1000);w2=logspace(log10(Wcr),3,1000);
Mag1=20*alpha*ones(1,numel(w1));Mag2=@(w2) 20*alpha*log10(w2);
semilogx(w1,Mag1);hold on;semilogx(w2,Mag2(w2));grid on;xlabel('Frequency');ylabel('dB')

请先登录，再进行评论。

更多回答（0 个）

类别

在 帮助中心 和 File Exchange 中查找有关 Get Started with Control System Toolbox 的更多信息

标签

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by