0 个投票

Hello,
How can I plot date in x-axis?
My csv file import dates as: '03/27/2020 19:10:35.537'
My code:
D = data{:,2};
d = datenum(D);
date = datetime(d,'Format','dd-MM-yyyy HH:mm:ss.SS','convertFrom','datenum');
As a result, I have my plots good, but only in same data (see Figure).
All my data has the same time, and have the same format 805 x 1 (double). For example, yellow line(good) and blue line (wrong) should be the same on x-axis.

请先登录，再回答此问题。

 采纳的回答

Cris LaPierre
Cris LaPierre 2020-4-11

0 个投票

I think we need to see your plot command to say for certain what is happening.
My recommendation would be to have your X data be the datetime variable. MATLAB is able to use that as X, and will may the XTickLabels the dates, which are easier to understand.
I would therefore use readtable to load the csv file. That way, I can import the dates directly as datetimes.

8 个评论
显示 6更早的评论 隐藏 6更早的评论

Márcio Gonçalves
Márcio Gonçalves 2020-4-11
编辑：Cris LaPierre 2020-4-11
Thanks for answer.
I am already import with readtable. However i have an error with plotting datetimes directly
Error using plot
Invalid data argument.
Error in hygrothermal_cyclesv2 (line 159)
plot(date, T1D,'b--','LineWidth',1);
Please see my code:
data = readtable('test1.csv');
D = data{:,2}; % Data
d = datenum(D);
date = datetime(d,'Format','dd-MM-yyyy HH:mm:ss.SS','convertFrom','datenum');
%termopares
T1D = (data{:,3}); % termopar 1D - canal 101
T2D = (data{:,4}); % termopar 2D - canal 102
T3D = (data{:,5}); % termopar 3D - canal 103
T4D = (data{:,6}); % termopar 4D - canal 104
...
%----------------------------------------------------------------------
figure()
set(gcf,'color','w');
set(gca,'fontsize', 18)
plot(date, T1D,'b--','LineWidth',1);
hold on
plot(date, T2D,'b','LineWidth',1);
hold on
plot(date, T3D,'g--','LineWidth',1);
hold on
plot(date, T4D,'g','LineWidth',1);
hold on
...
plot(inside,'k--','LineWidth',1);
hold on
plot(outside,'k:','LineWidth',1);
hold on
datetick('x','HH:MM:SS');
xlabel(('Date'), 'FontSize',18)
ylabel(('Temperature [ºC]'),'FontSize',18);
legend('T1D','T2D', 'T3D', 'T4D','T5D', 'T6D','T7D','T8D','T9D','T10D','inside','outside','Location','eastoutside','FontSize',18);
title('Layer D','FontSize',20);
Cris LaPierre
Cris LaPierre 2020-4-11
Any chance you can share your file test1.csv? If so, please attach it to your post.
In the meantime, you only need to turn hold on once for an axes. Once you are done plotting to that axes, it's also best practice to then turn it off.
Cris LaPierre
Cris LaPierre 2020-4-11
In the meantime, I mocked up a simple example using the data format you mentioned. Here is how I might do it. Replace 'Var#' with whatever the variable names are in your table.
data = readtable('test1.csv');
data.Var2.Format = 'dd-MM-yyyy HH:mm:ss.SS';
plot(data.Var2,data.Var3,'b--','LineWidth',1)
hold on
plot(data.Var2,data.Var4,'b--','LineWidth',1)
plot(data.Var2,data.Var5,'g--','LineWidth',1)
plot(data.Var2,data.Var6,'g--','LineWidth',1)
hold off
Márcio Gonçalves
Márcio Gonçalves 2020-4-13
I attached my csv file. The time is in colum 2.
thanks
Cris LaPierre
Cris LaPierre 2020-4-13
The best way to figure out how to read in the data is the Import Tool. It allows you to interactively set the data types, variable names, and visually inspect the results. Once you have it working, you can generate an import script or function for reuse.
Here's a short video that walks you through the steps.
With your data file, I went through and manually created the code to import the data and then format the data. Here's what that ended up looking like.
% Define the import options
opts = detectImportOptions('Marcio_mytest1.csv');
opts.DataLines = [2,inf];
opts.Delimiter = ";";
opts.VariableNames = {'Sweep','Time','Ch101','Ch102','Ch103','Ch104','Ch105',...
'Ch106','Ch107','Ch108','Ch109','Ch110','Ch111','Ch112','Ch113','Ch114','Ch115',...
'Ch116','Ch117','Ch118','Ch119','Ch120','Ch201','Ch202','Ch203','Ch204','Ch205',...
'Ch206','Ch207','Ch208','Ch209','Ch210','Ch211','Ch212','Ch213','Ch214','Ch215',...
'Ch216','Ch217','Ch218','Ch219','Ch220','Ch301','Ch302','Ch303','Ch304','Ch305',...
'Ch306','Ch307','Ch308','Ch309','Ch310','Ch311','Ch312','Ch313','Ch314','Ch315',...
'Ch316','Ch317','Ch318','Ch319','Ch320'};
opts = setvartype(opts,[1,3:62],"double");
opts = setvartype(opts,'Time',"datetime");
opts = setvaropts(opts, 'Time', "InputFormat", "MM/dd/yyyy HH:mm:ss.SSS");
% Read in the data file
data = readtable('test1.csv',opts);
% Set display date format
data.Time.Format = 'dd-MM-yyyy HH:mm:ss.SS';
% Plot
plot(data.Time,data.Ch101,'b--','LineWidth',1)
hold on
plot(data.Time,data.Ch102,'b--','LineWidth',1)
plot(data.Time,data.Ch103,'g--','LineWidth',1)
plot(data.Time,data.Ch104,'g--','LineWidth',1)
hold off
Cris LaPierre
Cris LaPierre 2020-4-13
编辑：Cris LaPierre 2020-4-27
If you want to specifically set the display format of the data on the axes, use the datetick function.
EDIT: Don't use datetick. Try xtickformat.
Peter Perkins
Peter Perkins 2020-4-14
Don't use the datetick function unless you have a veru old version of MATLAB. Stay away from datenum, datestr, and datetick. In fact, no offense to earlier responders intended, don't do any of that.
In a recent version of MATLAB, here's all you need:
>> tt = readtimetable('test1.csv','RowTimes','Time','PreserveVariableNames',true);
>> head(tt)
ans =
8×61 timetable
Time Sweep # Chan 101 (C) Chan 102 (C) Chan 103 (C) Chan 104 (C) Chan 105 (C) Chan 106 (C) Chan 107 (C) Chan 108 (C) Chan 109 (C) Chan 110 (C) Chan 111 (C) Chan 112 (C) Chan 113 (C) Chan 114 (C) Chan 115 (C) Chan 116 (C) Chan 117 (C) Chan 118 (C) Chan 119 (C) Chan 120 (C) Chan 201 (C) Chan 202 (C) Chan 203 (C) Chan 204 (C) Chan 205 (C) Chan 206 (C) Chan 207 (C) Chan 208 (C) Chan 209 (C) Chan 210 (C) Chan 211 (C) Chan 212 (C) Chan 213 (C) Chan 214 (C) Chan 215 (C) Chan 216 (C) Chan 217 (C) Chan 218 (C) Chan 219 (C) Chan 220 (C) Chan 301 (VDC) Chan 302 (VDC) Chan 303 (VDC) Chan 304 (VDC) Chan 305 (VDC) Chan 306 (VDC) Chan 307 (VDC) Chan 308 (VDC) Chan 309 (VDC) Chan 310 (VDC) Chan 311 (VDC) Chan 312 (VDC) Chan 313 (VDC) Chan 314 (VDC) Chan 315 (VDC) Chan 316 (VDC) Chan 317 (VDC) Chan 318 (VDC) Chan 319 (C) Chan 320 (C)
_______________________ _______ ____________ ____________ ____________ ____________ ____________ ____________ ____________ ____________ ____________ ____________ ____________ ____________ ____________ ____________ ____________ ____________ ____________ ____________ ____________ ____________ ____________ ____________ ____________ ____________ ____________ ____________ ____________ ____________ ____________ ____________ ____________ ____________ ____________ ____________ ____________ ____________ ____________ ____________ ____________ ____________ ______________ ______________ ______________ ______________ ______________ ______________ ______________ ______________ ______________ ______________ ______________ ______________ ______________ ______________ ______________ ______________ ______________ ______________ ____________ ____________
03/27/2020 19:10:35.537 1 15.4 15.4 15.3 15.2 16 15.5 15.4 15.3 15.3 15.3 20.3 20.8 20.5 21 20.1 20.2 20.2 20.3 19.1 19 18.3 19.3 18.2 19.5 17.8 18.6 23 15.8 15.7 20.5 21.1 20.8 20.4 22.6 20.5 20.5 19.7 21.1 19.6 16.2 20.5 73.1 -24.3 99.6 20 74.9 19.9 82.7 20 81.3 15.9 100 4.34e-05 4.07e-05 -3.79e-05 -4e-05 -3.97e-05 -5.59e-05 18 18.6
03/27/2020 19:15:35.536 2 15.4 15.4 15.3 15.2 16 15.5 15.4 15.3 15.4 15.3 21 21.4 21.1 21.8 20.8 20.9 20.9 20.9 19.7 19.6 18.8 20 18.7 20.2 18.3 19.2 23.3 15.8 15.7 21.1 21.7 21.5 21 23.2 21 21.1 20.4 21.7 20.2 16.1 21.2 72.8 -24.3 99.6 20.7 74.5 20.4 82.3 20.6 80.8 15.9 100 4.22e-05 3.76e-05 -3.97e-05 -3.71e-05 -4.02e-05 -5.49e-05 18.3 19
03/27/2020 19:20:35.536 3 15.4 15.4 15.3 15.2 16 15.5 15.4 15.3 15.4 15.3 21.4 21.9 21.6 22.3 21.3 21.3 21.3 21.4 20.2 20.2 19.2 20.5 19.1 20.7 18.7 19.8 23.4 15.8 15.7 21.6 22.2 21.9 21.5 22.4 21.5 21.6 22.5 22.1 20.7 16.2 21.7 72.5 -24.3 99.6 21.2 74.4 21 81.9 21.2 80.3 15.9 100 4.25e-05 3.23e-05 -3.83e-05 -3.29e-05 -3.88e-05 -5.12e-05 18.6 19.2
03/27/2020 19:25:35.536 4 15.4 15.4 15.4 15.2 16 15.5 15.4 15.3 15.4 15.3 21.7 22.1 21.9 22.4 21.6 21.6 21.6 21.8 20.6 20.6 19.5 21 19.4 21.1 19 20.1 23.4 15.8 15.7 21.9 22.4 22.1 21.8 22.4 21.8 22 22.7 22.3 21 16.1 22 72.3 -24.2 99.6 21.5 74 21.4 81.5 21.5 79.9 15.9 100 3.88e-05 2.65e-05 -3.73e-05 -2.78e-05 -3.72e-05 -4.77e-05 18.9 19.3
03/27/2020 19:30:35.576 5 15.4 15.5 15.4 15.2 16 15.5 15.5 15.3 15.5 15.4 21.9 22.3 22 22.5 21.9 21.8 21.8 22 20.9 20.9 19.7 21.3 19.6 21.3 19.2 20.4 23.3 15.8 15.7 22.1 22.6 22.3 22.1 22.5 22 22.2 22.7 22.5 21.3 16.2 22.3 72.1 -24.1 99.5 21.8 73.9 21.6 81.2 21.8 79.7 15.9 100 3.77e-05 2.31e-05 -3.55e-05 -2.33e-05 -3.66e-05 -4.46e-05 19.1 19.5
03/27/2020 19:35:35.574 6 15.5 15.5 15.4 15.2 16 15.6 15.5 15.3 15.5 15.4 22.1 22.5 22.1 22.6 22.1 22 21.9 22.2 21.1 21.1 19.9 21.5 19.7 21.5 19.4 20.5 23.5 15.8 15.7 22.3 22.7 22.4 22.2 22.4 22.2 22.3 22.8 22.5 21.5 16.2 22.5 72 -24.1 99.5 22 73.8 21.8 81 21.9 79.5 16 100 3.53e-05 1.93e-05 -3.59e-05 -2.12e-05 -3.64e-05 -4.28e-05 19.2 19.6
03/27/2020 19:40:35.536 7 15.5 15.5 15.4 15.2 15.5 15.6 15.5 15.3 15.5 15.4 22.2 22.6 22.2 22.6 22.2 22 22 22.3 21.2 21.2 20 21.7 19.8 21.6 19.5 20.7 23.3 15.8 15.7 22.4 22.8 22.5 22.4 22.4 22.3 22.5 22.8 22.6 21.7 16.1 22.7 72 -24.1 99.4 22.2 73.7 21.9 80.7 22.1 79.3 16 100 3.47e-05 1.67e-05 -3.5e-05 -1.91e-05 -3.51e-05 -4.15e-05 19.2 19.6
03/27/2020 19:45:35.546 8 15.5 15.5 15.5 15.2 15.5 15.6 15.5 15.4 15.5 15.5 22.2 22.6 22.2 22.7 22.3 22.2 22.2 22.4 21.3 21.4 20.1 21.8 19.9 21.8 19.6 20.8 23.4 15.8 15.7 22.5 22.9 22.6 22.5 22.5 22.4 22.6 22.9 22.7 21.8 16.1 22.7 71.9 -24.1 99.5 22.3 73.6 22.1 80.6 22.2 79.2 16 100 3.52e-05 1.66e-05 -3.57e-05 -1.85e-05 -3.65e-05 -4.13e-05 19.3 19.6
>> stackedplot(tt(:,1:10))
In less recent versions, you won't be able to use PreserveVariableNames, they will be modified with a warning. And you won't be able to use readtimetiable, use readtable and table2timetable.
If stackedplot isn't doing what you need, you can make whatever other plot you want with something like
plot(tt.Time,tt.Chan101_C_)
but don't use datetick on a datetime plot. For sure, don't do this:
D = data{:,2};
d = datenum(D);
date = datetime(d,'Format','dd-MM-yyyy HH:mm:ss.SS','convertFrom','datenum');
If the data are read in as text, convert them directly to datetime. In recent versions, read them in directly as datetimes using detectimportoptions.
Márcio Gonçalves
Márcio Gonçalves 2020-4-14
Thank you all for your answers.
I will try your suggestions as soon as possible and I give you the feedback.
My matlab version is R2019a.

请先登录，再进行评论。

更多回答（1 个）

Márcio Gonçalves
Márcio Gonçalves 2020-4-20

0 个投票

Dear Cris LaPierre,
Your code works perfectly. Thank you.
Dear Peter Perkins,
My matlab doesn't work with "PreserveVariableNames".
Thanks

2 个评论
显示 无 隐藏 无

Peter Perkins
Peter Perkins 2020-4-27
编辑：Peter Perkins 2020-4-27
As I said, "In less recent versions, you won't be able to use PreserveVariableNames, they will be modified with a warning. And you won't be able to use readtimetiable, use readtable and table2timetable." Unless you are using a really old version of MATLAB, I really, strongly, recommend that you try what I have suggested.
Márcio Gonçalves
Márcio Gonçalves 2020-4-27
ok, thank you for your help.

请先登录，再进行评论。

类别

在 帮助中心 和 File Exchange 中查找有关 Calendar 的更多信息

标签

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by