Angle Doppler response using FFT

6 次查看（过去 30 天）
ahmed hussain
ahmed hussain 2020-4-14
评论： ahmed hussain 2020-4-15
I m simulating a target at 45 degrees azimuth and with a certain doppler..I m using the following code to find angle doppler response...However, i get an error of 15 degrees in angle...
%% Beamforming and doppler processing
sigvol = zeros(fs*pri,128,128);
sigvol1 = sigvol;
tcsig1 = zeros(fs*pri,N,M);
for i = 1:300
temp1 = shiftdim(tsig(i,:,:));
temp2 = fftshift(fft(temp1,128,1),1); %% doppler processing
temp3 = fftshift(fft(temp2,128,2),2); %%beamforming
sigvol(i,:,:) =temp3 ;
end
ad = pow2db(abs(squeeze(sigvol(128,:,:))));
figure(2)
angle_axis = linspace(-90,90,128);
doppler_axis = -prf/2:prf/128:(prf/2)-(prf/128);
imagesc(angle_axis,doppler_axis,ad.');
colormap(jet)
colorbar
xlabel('Angle')
ylabel('Doppler')

请先登录，再回答此问题。

采纳的回答

Honglei Chen
Honglei Chen 2020-4-15
I notice that you are using 128th range gate for plotting. Are you sure you have the correct target there? You can try to verify the result with what returned from phased.AngleDopplerResponse in Phased Array System Toolbox.
HTH
  1 个评论
ahmed hussain
ahmed hussain 2020-4-15
I have cross checked it with phased angle Doppler response..phased angle Doppler response gives the correct angle...however , the above code gives a bias of of 15 to 20 degrees

请先登录，再进行评论。

更多回答（0 个）

类别

在 Help Center 和 File Exchange 中查找有关 Detection, Range and Doppler Estimation 的更多信息

标签

产品

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by