Error in app designer

Question

Vahid Abolhasannejad 2020-4-20

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/519423-error-in-app-designer

评论： Zayad 2023-12-12

I have faced an error in my code like it says

Invalid expression. Check for missing multiplication operator, missing or unbalanced delimiters, or other syntax error. To construct matrices, use brackets instead of parentheses.

on the following statement:

% Component initialization
    methods (Access = private)

It's a solid statement at the end of code and I cannot change it at all. Does anybody know how to fix this problem? since it doesn't allow me to run the program.

Thank you.

Vahid.

8 个评论
显示 6更早的评论隐藏 6更早的评论

Vahid Abolhasannejad 2020-4-20

编辑：Walter Roberson 2020-4-20

在 MATLAB Online 中打开

Thank you Walter for your message,

I have my own code above this statement. I have actually designed an application. Here is some lines above and more lines bellow this statement:

% Button pushed function: VisualizeOriginalChannelButton
        function VisualizeOriginalChannelButtonPushed(app, event)
            
        end
        end
    end
    % Component initialization
    methods (Access = private)
        % Create UIFigure and components
        function createComponents(app)
            % Create UIFigure and hide until all components are created
            app.UIFigure = uifigure('Visible', 'off');
            app.UIFigure.Position = [100 100 1316 959];
            app.UIFigure.Name = 'MATLAB App';
            % Create UIAxes
            app.UIAxes = uiaxes(app.UIFigure);
            title(app.UIAxes, 'ECG Diagram')
            xlabel(app.UIAxes, 'Time')
            ylabel(app.UIAxes, 'Voltage')
            app.UIAxes.Position = [71 474 927 447];
            % Create VisualizationPannelPanel
            app.VisualizationPannelPanel = uipanel(app.UIFigure);
            app.VisualizationPannelPanel.Title = 'Visualization Pannel';
            app.VisualizationPannelPanel.Position = [111 202 210 221];
            % Create CannelNoDropDownLabel
            app.CannelNoDropDownLabel = uilabel(app.VisualizationPannelPanel);
            app.CannelNoDropDownLabel.HorizontalAlignment = 'right';
            app.CannelNoDropDownLabel.Position = [12 156 66 22];
            app.CannelNoDropDownLabel.Text = 'Cannel No.';
            % Create CannelNoDropDown
            app.CannelNoDropDown = uidropdown(app.VisualizationPannelPanel);
            app.CannelNoDropDown.Items = {'Chennel 1', 'Channel 2'};
            app.CannelNoDropDown.Position = [93 156 100 22];
            app.CannelNoDropDown.Value = 'Chennel 1';
            % Create VisualizeOriginalChannelButton
            app.VisualizeOriginalChannelButton = uibutton(app.VisualizationPannelPanel, 'push');
            app.VisualizeOriginalChannelButton.ButtonPushedFcn = createCallbackFcn(app, @VisualizeOriginalChannelButtonPushed, true);
            app.VisualizeOriginalChannelButton.Position = [29 110 156 22];
            app.VisualizeOriginalChannelButton.Text = 'Visualize Original Channel';
            % Create VisualizeCleanChannelButton
            app.VisualizeCleanChannelButton = uibutton(app.VisualizationPannelPanel, 'push');
            app.VisualizeCleanChannelButton.Position = [29 70 156 22];
            app.VisualizeCleanChannelButton.Text = 'Visualize Clean Channel';
            % Create ClearPlotButton
            app.ClearPlotButton = uibutton(app.VisualizationPannelPanel, 'push');
            app.ClearPlotButton.Position = [29 31 156 22];
            app.ClearPlotButton.Text = 'Clear Plot';
            % Create Panel
            app.Panel = uipanel(app.UIFigure);
            app.Panel.Title = 'Panel';
            app.Panel.Position = [538 201 452 221];
            % Create ChannelNoDropDownLabel
            app.ChannelNoDropDownLabel = uilabel(app.Panel);
            app.ChannelNoDropDownLabel.HorizontalAlignment = 'right';
            app.ChannelNoDropDownLabel.Position = [15 156 72 22];
            app.ChannelNoDropDownLabel.Text = 'Channel No.';
            % Create ChannelNoDropDown
            app.ChannelNoDropDown = uidropdown(app.Panel);
            app.ChannelNoDropDown.Items = {'Channel 1', 'Channel 2', ''};
            app.ChannelNoDropDown.Position = [102 156 100 22];
            app.ChannelNoDropDown.Value = 'Channel 1';
            % Create FromTimeEditFieldLabel
            app.FromTimeEditFieldLabel = uilabel(app.Panel);
            app.FromTimeEditFieldLabel.HorizontalAlignment = 'right';
            app.FromTimeEditFieldLabel.Position = [24 115 63 22];
            app.FromTimeEditFieldLabel.Text = 'From Time';
            % Create FromTimeEditField
            app.FromTimeEditField = uieditfield(app.Panel, 'numeric');
            app.FromTimeEditField.Position = [102 115 100 22];
            % Create ToTimeEditFieldLabel
            app.ToTimeEditFieldLabel = uilabel(app.Panel);
            app.ToTimeEditFieldLabel.HorizontalAlignment = 'right';
            app.ToTimeEditFieldLabel.Position = [40 70 48 22];
            app.ToTimeEditFieldLabel.Text = 'To Time';
            % Create ToTimeEditField
            app.ToTimeEditField = uieditfield(app.Panel, 'numeric');
            app.ToTimeEditField.Position = [103 70 99 22];
            % Create FromTimeEditField_2Label
            app.FromTimeEditField_2Label = uilabel(app.Panel);
            app.FromTimeEditField_2Label.HorizontalAlignment = 'right';
            app.FromTimeEditField_2Label.Position = [232 115 63 22];
            app.FromTimeEditField_2Label.Text = 'From Time';
            % Create FromTimeEditField_2
            app.FromTimeEditField_2 = uieditfield(app.Panel, 'numeric');
            app.FromTimeEditField_2.Position = [310 115 100 22];
            % Create ToTimeEditField_2Label
            app.ToTimeEditField_2Label = uilabel(app.Panel);
            app.ToTimeEditField_2Label.HorizontalAlignment = 'right';
            app.ToTimeEditField_2Label.Position = [247 70 48 22];
            app.ToTimeEditField_2Label.Text = 'To Time';
            % Create ToTimeEditField_2
            app.ToTimeEditField_2 = uieditfield(app.Panel, 'numeric');
            app.ToTimeEditField_2.Position = [310 70 100 22];
            % Create CompareECGButton
            app.CompareECGButton = uibutton(app.Panel, 'push');
            app.CompareECGButton.Position = [35 20 179 22];
            app.CompareECGButton.Text = 'Compare ECG ';
            % Create ClearPlotButton_2
            app.ClearPlotButton_2 = uibutton(app.Panel, 'push');
            app.ClearPlotButton_2.Position = [279 20 100 22];
            app.ClearPlotButton_2.Text = 'Clear Plot';
            % Create UITable
            app.UITable = uitable(app.UIFigure);
            app.UITable.ColumnName = {'Clean Time Periods'};
            app.UITable.RowName = {};
            app.UITable.Position = [358 202 139 221];
            % Show the figure after all components are created
            app.UIFigure.Visible = 'on';
        end
    end

Vahid Abolhasannejad 2021-4-7

Hello Walter, thank you for your comment. That part I mentioned was among the defauls of the code that could not be changed. So the problem was solved. Thanks again for your help.

Zayad 2023-12-12

how did you solve it?

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Ganesh Regoti 2020-4-28

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/519423-error-in-app-designer#answer_428802

Hi Vahid,

By the error statement, I would say it might be a syntactical error. Go through the code to check if it is properly formatted and ended. Regarding the solid statements,

When you create an app from app designer, there is a default code generated based on the components which is non-editable.
When you add callbacks, properties, methods, an editable area is created with declarations where you can edit/add your code.

Here are the links you refer to for more information

https://www.mathworks.com/help/matlab/app-designer.html

https://www.mathworks.com/help/matlab/creating_guis/create-a-simple-app-or-gui-using-app-designer.html

Hope this helps!

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

Vahid Abolhasannejad 2021-4-7

Hello Ganesh, thank you for your comment. That part I mentioned was among the defauls of the code that could not be changed. So the problem was solved. Thanks again for your help.

请先登录，再进行评论。

Answer 2

Justi Kertusha 2023-11-30

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/519423-error-in-app-designer#answer_1363309

编辑：Walter Roberson 2023-12-3

在 MATLAB Online 中打开

% LightBehaviorApp.m
classdef LightBehaviorApp < matlab.apps.AppBase
    % Properties that correspond to app components 
    properties (Access=public)
        UIFigure matlab.ui.Figure 
        Material1EditField matlab.ui.control.NumericEditField 
        Material2EditField matlab.ui.control.NumericEditField 
        IncidentAngleEditField matlab.ui.control.NumericEditField 
        CalculateButton matlab.ui.control.Button 
        TrajectoryAxes matlab.ui.control.UIAxes 
    end
    % Callbacks that handle component events
    methods(Access=private)
        % Code that executes after component creation 
        function startupFcn(app)
            % Set default values for the indices of refraction
            app.Material1EditField.Value = 1.5; 
            app.Material2EditField.Value = 1.0;
            app.IncidentAngleEditField.Value = 45;
        end
        % Button pushed function
        function CalculateButtonPushed(app, ~)
            % Get user inputs
            n1 = app.Material1EditField.Value; 
            n2 = app.Material2EditField.Value; 
            incidentAngle = app.IncidentAngleEditField.Value;
            % Calculate refraction angle using Snell's Law
            refractedAngle = asind((n1/n2) * sind(incidentAngle));
            % Plot the trajectory of light within each medium
            cla(app.TrajectoryAxes); 
            hold(app.TrajectoryAxes, 'on'); 
            plot(app.TrajectoryAxes, [0, cosd(incidentAngle)], [0, sind(incidentAngle)]); 
            plot(app.TrajectoryAxes, [0, cosd(refractedAngle)], [-sind(incidentAngle), -sind(incidentAngle)]);
            hold(app.TrajectoryAxes, 'off'); 
            axis(app.TrajectoryAxes, 'equal');
            title(app.TrajectoryAxes, 'Light Trajectory'); 
            legend(app.TrajectoryAxes, {'Incident Ray', 'Refracted Ray'}); 
        end 
    end
    % App creation and deletion 
    methods (Access=public)
        % Construct app 
        function app = LightBehaviorApp
            % Create UIFigure and components 
            createComponents(app);
            % Register the app with App Designer
            registerApp(app, app.UIFigure);
            % Execute the startup function
            runStartupFcn(app, @startupFcn); 
            if nargout == 0
                clear app;
            end
        end
        % Code that executes before app deletion 
        function delete(app)
            % Delete UIFigure when app is deleted
            delete(app.UIFigure); 
        end 
    end
    % Function to create and configure UI components
    methods (Access=private)
        function createComponents(app)
            % Create UIFigure and set its properties
            app.UIFigure = matlab.ui.Figure('Visible', 'off');
            app.UIFigure.Position = [100, 100, 600, 400];
            app.UIFigure.Name = 'LightBehaviorApp';
            % Create Material1EditField component
            app.Material1EditField = matlab.ui.control.NumericEditField(app.UIFigure);
            app.Material1EditField.Position = [100, 300, 100, 30];
            app.Material1EditField.String = '1.5';
            app.Material1EditField.Label = 'Material 1 Refractive Index';
            % Create Material2EditField component
            app.Material2EditField = matlab.ui.control.NumericEditField(app.UIFigure);
            app.Material2EditField.Position = [100, 250, 100, 30];
            app.Material2EditField.String = '1.0';
            app.Material2EditField.Label = 'Material 2 Refractive Index';
            % Create IncidentAngleEditField component
            app.IncidentAngleEditField = matlab.ui.control.NumericEditField(app.UIFigure);
            app.IncidentAngleEditField.Position = [100, 200, 100, 30];
            app.IncidentAngleEditField.String = '45';
            app.IncidentAngleEditField.Label = 'Incident Angle';
            % Create CalculateButton component
            app.CalculateButton = matlab.ui.control.Button(app.UIFigure);
            app.CalculateButton.Position = [250, 200, 100, 30];
            app.CalculateButton.Text = 'Calculate';
            app.CalculateButton.ButtonPushedFcn = @app.CalculateButtonPushed;
            % Create TrajectoryAxes component
            app.TrajectoryAxes = matlab.ui.control.UIAxes(app.UIFigure);
            app.TrajectoryAxes.Position = [400, 100, 150, 200];
        end
    end
end

This is given me an error in line 55

Error in LightBehaviorApp (line 55)

createComponents(app);

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

Walter Roberson 2023-12-3

在 MATLAB Online 中打开

app.Material1EditField = matlab.ui.control.NumericEditField(app.UIFigure);

When you call matlab.ui.control.NumericEditField directly, then any parameters you pass must be paired, property/value form. When you call it directly, it does not accept a figure positionally.

You should be calling uieditfield(app.UIFigure,"numeric") instead.

请先登录，再进行评论。