SRS in Uplink Carrier Waveform Generation

1 次查看（过去 30 天）
Javier Sola morras
Javier Sola morras 2020-4-25
评论： Sriram Tadavarty 2020-5-8
Taking the example of toolbox 5g Uplink Carrier Waveform Generation (https://es.mathworks.com/help/5g/gs/uplink-carrier-waveform-generation.html), when running the simulation the SRS is not represented. What is the reason?

请先登录，再回答此问题。

采纳的回答

Sriram Tadavarty
Sriram Tadavarty 2020-4-27
Hi,
Its because in the SRS Instances configuration, the Enable field is set to 0. Here is the code that is present in that section
srs = struct();
srs(1).Enable = 0; % Enable SRS config
% Update the above line with
srs(1).Enable = 1; % Value of 0 is changed to 1
Now run the example and output will display the SRS pattern.
Hope this helps.
Regards,
Sriram
  4 个评论
显示 2更早的评论
Javier Sola morras
Javier Sola morras 2020-5-6
The characteristics of the SRS signal can be modified so that Allocated PRB is equal to 0:bwp(1).NRB-1?
Sriram Tadavarty
Sriram Tadavarty 2020-5-8
SRS signal characteristics depends on the other parameters in the srs structure. If the AllocatedPRB is increased, only the RE in frequency domain having SRS will be increased, but doesn't change SRS pattern.

请先登录，再进行评论。

更多回答（0 个）

类别

在 Help Center 和 File Exchange 中查找有关 Waveform Generation 的更多信息

标签

产品

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by