![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/289755/image.png)
Slice and streamslice along diagonal
13 次查看(过去 30 天)
显示 更早的评论
Hello,
I have X,Y,Z,U,V,W 3D arrays of the size 101x201x4. I plotted slice and streamslie in the x-z plane along y = -3 as shown in the attached figure (red line). The code is:
[X,Y,Z] = meshgrid(-4:0.05:6,-5:0.05:0,1:4);
% Plot streamlines for the given cross-section
ssh = streamslice(X,Y,Z,U,V,W,[],-3,[]);
set(ssh,'Color',[0 0 0],'LineWidth',2)
hold on
view(0,0)
% Plot volumetirc slice
Vel = sqrt(U.^2+V.^2+W.^2)
sh = slice(X,Y,Z,Vel,[],-3,[]);
colormap jet
set(sh,'EdgeColor','none',...
'FaceColor','interp',...
'FaceAlpha','interp');
alpha('color');
% c = colorbar('Location','eastoutside');
view(0,0)
zlim([0.5,4]); zl = zlim; zticks([1,2,3,4])
How can I plot the horizontal vs. z direction along the green line in the attached figure? That is, how to specify planes that are not at constant x,y or z?
Attahed is also a plot of what I would like in the diagonal direction, but I made it at y = -3 (red line in Slice.png)
Thank you,
djr
0 个评论
采纳的回答
darova
2020-5-2
Try this simple example
[x,y,z,v] = flow;
[Z,Y] = meshgrid(-3:0.5:3);
X = 3+(Z.^2+Y.^2)/5;
slice(x,y,z,v,X,Y,Z)
hold on
slice(x,y,z,v,[1 9],2,-2)
hold off
axis vis3d equal
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/289755/image.png)
7 个评论
Ameer Hamza
2020-5-3
You can do it here. First unaccept my answer and then accept darova’s answer. Even accepting darova’s current answer will make it easy for anyone coming to this page to find a solution. Alternatively, if darova posted a new answer later, you can accept that too.
更多回答(1 个)
Ameer Hamza
2020-5-2
编辑:Ameer Hamza
2020-5-2
See this example, on how to create an arbitrary surface for the slice function: https://www.mathworks.com/help/releases/R2020a/matlab/ref/slice.html#mw_e9ea56fc-b860-4fbe-99d5-6c3e4725132f
You will need to do something like this. Suppose the equation of the green line is z=2*x (assuming x-axis is the horizontal axis)
x_range = -1:0.1:1;
y_range = -5:0.1:1;
[X_grid, Y_frid] = meshgrid(x_range, y_range);
Z = 2*x;
slice(X,Y,Z,V,X_grid,y_grid,Z)
3 个评论
Ameer Hamza
2020-5-2
It seems from the documentation of streamslice function that it might not be possible to create it along a specific plane. It just creates it parallel to the coordinate planes.
Try this simple example. I used a small grid to illsutrate the idea.
load wind
[xg, yg] = meshgrid(80:5:90, 20:2:25);
zg = 2*xg+yg;
streamslice(x,y,z,u,v,w,xg,yg,zg)
view(3)
另请参阅
类别
在 Help Center 和 File Exchange 中查找有关 Surface and Mesh Plots 的更多信息
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!