USRP B210 for real-time sensing application

17 次查看（过去 30 天）
Amrit Zoad
Amrit Zoad 2020-5-4
回答： Sai Sri Pathuri 2020-5-8
I am working with a USRP B210 for real-time sensing application.
I have built the sensor and connected it to the USRP.
I want to 1) sweep the frequency from 5 to 6 GHz and 2) detect where the least reflection is.
I am stuck at the first part. I tried it by producing a chirp signal of 5-6 GHz and sending it through the Transmitter.
I want to continuously sweep from 5-6 GHz and gather the data at Rx and save it in a file.
So, both the lights should remain 'ON' all the time.
While the RX remains 'ON' all the time, the problem is that chirp signal at the TX takes some time to produce and only blinks once in approx. 30 secs.
Here is the code:
connectedRadios = findsdru;
addressRX = '30AC288';
platformRX = 'B210';
addressTX = '30AC288';
platformTX = 'B210';
tx = comm.SDRuTransmitter(...
'Platform','B210', ...
'SerialNum','30AC288', ...
'CenterFrequency',5.7537e9, ...
'Gain',55, ...
'MasterClockRate', 1e7, ...
'InterpolationFactor',512);
chirp = dsp.Chirp(...
'SweepDirection', 'Unidirectional', ...
'TargetFrequency', 6e9, ...
'InitialFrequency', 5e9, ...
'TargetTime', 1, ...
'SweepTime', 1, ...
'SamplesPerFrame', 256, ...
'SampleRate', 1/8000);
rx = comm.SDRuReceiver(...
'Platform','B210', ...
'SerialNum','30AC288', ...
'ChannelMapping',2, ...
'CenterFrequency',5.7537e9, ...
'DecimationFactor',100, ...
'Gain',55, ...
'SamplesPerFrame',256, ...
'MasterClockRate', 1e7);
sampleRate = rx.MasterClockRate/rx.DecimationFactor; % Calculate baseband sample rate
rxWriter = comm.BasebandFileWriter('b210_capture.bb', ...
sampleRate, rx.CenterFrequency);
for counter = 1:20000
chirp = dsp.Chirp();
tx(chirp());
[data, len] = rx();
if len>0
rxWriter(data);
end
end

请先登录，再回答此问题。

回答（1 个）

Sai Sri Pathuri
Sai Sri Pathuri 2020-5-8
Since you are using a single USRP, you transmit and receive in the same loop. Receiving the signal and writing it to the file might be consuming some time and hence, Tx might be taking time between transmissions. If you think it is because of generation of chirp signal, you may generate chirp signal outside the loop and use those values
chirpSignal = chirp();
for counter = 1:20000
tx(chirpSignal);
[data, len] = rx();
if len>0
rxWriter(data);
end
end

类别

在 Help Center 和 File Exchange 中查找有关 Communications Toolbox 的更多信息

标签

产品


版本

R2020a

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by