abc to dq transformation

5 次查看（过去 30 天）

显示更早的评论

Ahmad Badran 2020-5-11

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/524562-abc-to-dq-transformation

评论： Zakaria Bouzid 2022-6-13

Iam working on dynamic model for induction generator I stuck on the trasformation part from abc to dq referance frame.

in matlab block there is wt input signal. but i relay i do not jknow what this value should be or how we can optin it.

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

Zakaria Bouzid 2022-6-13

connect to the second input a vectorized signal containing the [sin(ωt) cos(ωt)] values, where ω is the rotation speed of the reference frame.

@abdelaziz

请先登录，再进行评论。

请先登录，再回答此问题。

回答（1 个）

Walter Roberson 2020-5-11

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/524562-abc-to-dq-transformation#answer_431713

wt: The angular position of the dq rotating frame, in radians.

https://www.mathworks.com/help/physmod/sps/powersys/ref/abctodq0dq0toabc.html

4 个评论
显示 2更早的评论隐藏 2更早的评论

Ahmad Badran 2020-5-11

编辑：Ahmad Badran 2020-5-11

How this can be decided, in my case the induction generator is conected to the strong grid with fixed frequency and voltage

Walter Roberson 2020-5-12

Are you modeling constant-rate rotation or variable-rate rotation? If you are modeling variable-rate rotation, then is the rotation angle to be the current value of some signal, or is it to be the accumulated value of some signal? For example, is the rotation angle to be proportional to the total current that has flowed over some particular signal?

If the rotation rate is not constant, then are you modeling a system with friction? Is the friction non-linear?

请先登录，再进行评论。

请先登录，再回答此问题。