When you image() or imagesc(), you can tell it the data coordinates at which to put the centers of the lower-left and upper-right pixels. Do be careful though because it is the center, not the edges.
How can I see the actual size of MRI slice?
1 次查看（过去 30 天）
显示 更早的评论
Or any other picture.
In my axis (showing the MRI) the xmax and ymax are the number of pixels the image have.
Can I get the actual size of image in milimeters from metadata?
How can I set that axis so the y and x scales are shown in mm or inches?
Thanks.
采纳的回答
Walter Roberson
2012-11-5
15 个评论
Tomislav
2012-11-5
Uh!
I dont even know the physical measurments of slice to begin with.
Can it be set directly on axis in GUI property inspector?
Thanks.
Walter Roberson
2012-11-5
You mentioned "metadata". Is the image a DICOM image? If so then information in the metadata should tell you the sizes involved, even if only the position and the pixel heights and widths.
The property inspector can set the axis XLimit and YLimit and so control the scaling of what is in the axis, but the inner image() object will be scaled within that size according to its XData and YData properties.
The only way you have of changing what shows up in the labels without changing the [XY]Limit and [XY]Data, would be to set the [XY]Label to the values you want -- to "lie". The XTick at location (say) 7 pixels can be told to present the text label "1.2mm" for example. Just don't expect zooming or data cursor to play nice if you do this.
Walter Roberson
2012-11-6
See http://www.mathworks.com/matlabcentral/fileexchange/23455-dicom-directory-of-slices-to-3d-volume-image/content/dicom23D.m for PixelSpacing and see the PhysicalHeight and PhysicalWidth fields that can be returned there.
Walter Roberson
2012-11-6
编辑：Walter Roberson
2012-11-6
What do you have in the metadata ?
Note that the physical H and W are calculated by the routine I pointed to.
Tomislav
2012-11-6
I understand that physical H and w are calculated from PixelSpacing.
Here is what I have when type info = dicominfo('0001.dcm'):
Filename: '0001.dcm'
FileModDate: '09-lis-2012 21:12:52'
FileSize: 21816
Format: 'DICOM'
FormatVersion: 3
Width: 127
Height: 165
BitDepth: 8
ColorType: 'grayscale'
FileMetaInformationGroupLength: 196
FileMetaInformationVersion: [2x1 uint8]
MediaStorageSOPClassUID: '1.2.840.10008.5.1.4.1.1.7'
MediaStorageSOPInstanceUID: '1.2.276.0.7230010.3.1.4.3310894256.1932.1349809972.4'
TransferSyntaxUID: '1.2.840.10008.1.2.1'
ImplementationClassUID: '1.2.276.0.7230010.3.0.3.5.4'
ImplementationVersionName: 'OFFIS_DCMTK_354'
SOPClassUID: '1.2.840.10008.5.1.4.1.1.7'
SOPInstanceUID: '1.2.276.0.7230010.3.1.4.3310894256.1932.1349809972.4'
StudyDate: '20121009'
SeriesDate: '20121009'
StudyTime: '191252'
SeriesTime: '191252'
AccessionNumber: ''
Modality: 'OT'
ConversionType: 'WSD'
Manufacturer: ''
InstitutionName: ''
ReferringPhysicianName: [1x1 struct]
StudyDescription: ''
SeriesDescription: ''
PatientName: [1x1 struct]
PatientID: ''
PatientBirthDate: ''
PatientBirthTime: ''
PatientSex: ''
StudyInstanceUID: '1.2.276.0.7230010.3.1.2.3310894256.1932.1349809972.5'
SeriesInstanceUID: '1.2.276.0.7230010.3.1.3.3310894256.1932.1349809972.6'
StudyID: ''
SeriesNumber: ''
InstanceNumber: ''
SamplesPerPixel: 1
PhotometricInterpretation: 'MONOCHROME2'
NumberOfFrames: 1
Rows: 165
Columns: 127
BitsAllocated: 8
BitsStored: 8
HighBit: 7
PixelRepresentation: 0
Walter Roberson
2012-11-6
Modality: 'OT' stands for "other". Your file is marked as if it did not originate from MRI (Modality 'MR'), so it does not have information about the physical measurements.
Is it possible that this file is not the original data generated by the MRI machine?
Tomislav
2012-11-6
The MRI slices are taken at well known medicine facility. It is original MRI data.
But it was for research purposes specially for faculty, so I guess it could lack some information because of that.
OK. Thank you all.
Walter Roberson
2012-11-7
The DICOM images I used always filled in the manufacturer. The header for that image suggests to me it was created by a post-processing program rather by the device directly.
Tomislav
2012-11-7
My bad:
I have converted the original dicom so it is result of that:
This is original:
Filename: '9113.dcm'
FileModDate: '20-ruj-2012 17:01:40'
FileSize: 161814
Format: 'DICOM'
FormatVersion: 3
Width: 192
Height: 248
BitDepth: 16
ColorType: 'grayscale'
FileMetaInformationGroupLength: 192
FileMetaInformationVersion: [2x1 uint8]
MediaStorageSOPClassUID: '1.2.840.10008.5.1.4.1.1.4'
MediaStorageSOPInstanceUID: '1.2.276.0.7238010.5.1.4.0.975.1348153299.2477'
TransferSyntaxUID: '1.2.840.10008.1.2.1'
ImplementationClassUID: '1.2.276.0.7238010.5.0.3.5.4'
ImplementationVersionName: 'OSIRIX'
SourceApplicationEntityTitle: 'DCF'
SpecificCharacterSet: 'ISO_IR 100'
ImageType: 'ORIGINAL\PRIMARY\M\ND\NORM'
InstanceCreationDate: '20120918'
InstanceCreationTime: '181507.171000'
SOPClassUID: '1.2.840.10008.5.1.4.1.1.4'
SOPInstanceUID: '1.2.276.0.7238010.5.1.4.0.975.1348153299.2477'
StudyDate: '20120918'
SeriesDate: '20120918'
AcquisitionDate: '20120918'
ContentDate: '20120918'
StudyTime: '180818.312000'
SeriesTime: '181507.156000'
AcquisitionTime: '181107.092500'
ContentTime: '181507.171000'
AccessionNumber: ''
Modality: 'MR'
Manufacturer: 'SIEMENS'
InstitutionName: 'KB-Dubrava'
InstitutionAddress: 'Avenija G. Suska bb 25,Zagreb,Dubrava,HR,10000'
ReferringPhysicianName: [1x1 struct]
StationName: 'MRC26479'
StudyDescription: 'MR L-S KRALJEZ.(NATIVNO)'
SeriesDescription: 'dicom_denis'
PerformingPhysicianName: [1x1 struct]
OperatorName: [1x1 struct]
ManufacturerModelName: 'OsiriX'
ReferencedPatientSequence: [1x1 struct]
ReferencedImageSequence: [1x1 struct]
PatientName: [1x1 struct]
PatientID: '648053'
IssuerOfPatientID: 'MEDAVIS'
PatientBirthDate: '19770129'
PatientSex: 'M'
PatientAge: '035Y'
PatientWeight: 90
PatientAddress: 'MEDVEDGRADSKA 22A 10000 ZAGREB'
MedicalRecordLocator: '12-39764'
BodyPartExamined: 'HEAD'
ScanningSequence: 'GR\IR'
SequenceVariant: 'SP\MP\OSP'
ScanOptions: 'IR\PFP'
MRAcquisitionType: '3D'
SequenceName: '*tfl3d1'
AngioFlag: 'N'
SliceThickness: 1
RepetitionTime: 1910
EchoTime: 3.5300
InversionTime: 1100
NumberOfAverages: 1
ImagingFrequency: 63.6758
ImagedNucleus: '1H'
EchoNumber: 1
MagneticFieldStrength: 1.5000
NumberOfPhaseEncodingSteps: 223
EchoTrainLength: 1
PercentSampling: 100
PercentPhaseFieldOfView: 75
PixelBandwidth: 130
DeviceSerialNumber: '26479'
SoftwareVersion: 'syngo MR B15'
ProtocolName: 't1_mpr_tra_p2_iso'
TransmitCoilName: 'Body'
AcquisitionMatrix: [4x1 uint16]
InPlanePhaseEncodingDirection: 'ROW'
FlipAngle: 15
VariableFlipAngleFlag: 'N'
SAR: 0.0216
dBdt: 0
PatientPosition: 'HFS'
Private_0019_10xx_Creator: 'SIEMENS MR HEADER'
Private_0019_1008: 'IMAGE NUM 4'
Private_0019_1009: '1.0'
Private_0019_100b: 2.3556e+005
Private_0019_100f: 'Fast'
Private_0019_1011: 'No'
Private_0019_1012: [3x1 int32]
Private_0019_1013: [3x1 int32]
Private_0019_1014: [3x1 double]
Private_0019_1015: [3x1 double]
Private_0019_1017: 0.8036
Private_0019_1018: 15000
StudyInstanceUID: '1.3.12.2.1107.5.2.30.26479.30000012091805010335900000018'
SeriesInstanceUID: '1.3.6.1.4.1.19291.2.1.2.3698460998831100008'
StudyID: '166767'
SeriesNumber: 5340
AcquisitionNumber: 1
InstanceNumber: 1
ImagePositionPatient: [3x1 double]
ImageOrientationPatient: [6x1 double]
FrameOfReferenceUID: '1.3.12.2.1107.5.2.30.26479.1.20120918180818437.0.0.0'
PositionReferenceIndicator: ''
SliceLocation: -61.1414
SamplesPerPixel: 1
PhotometricInterpretation: 'MONOCHROME2'
Rows: 248
Columns: 192
PixelSpacing: [2x1 double]
BitsAllocated: 16
BitsStored: 16
HighBit: 15
PixelRepresentation: 0
WindowCenter: 537
WindowWidth: 1079
RescaleIntercept: 0
RescaleSlope: 1
RescaleType: 'US'
FrameOfInterestDescription: '0'
Private_0029_10xx_Creator: 'SIEMENS CSA HEADER'
Private_0029_11xx_Creator: 'SIEMENS MEDCOM HEADER2'
Private_0029_1008: 'IMAGE NUM 4'
Private_0029_1009: '20120918'
Private_0029_1010: [9380x1 uint8]
Private_0029_1018: 'MR'
Private_0029_1019: '20120918'
Private_0029_1020: [54056x1 uint8]
Private_0029_1160: 'com'
RequestingPhysician: [1x1 struct]
RequestedProcedureDescription: 'GLAVA MR MOZGA'
PerformedProcedureStepStartDate: '20120918'
PerformedProcedureStepStartTime: '180818.390000'
PerformedProcedureStepID: 'MR20120918180818'
PerformedProcedureStepDescription: 'GLAVA^MR MOZGA'
Private_0051_10xx_Creator: 'SIEMENS MR HEADER'
Private_0051_1008: 'IMAGE NUM 4'
Private_0051_1009: '1.0'
Private_0051_100a: 'TA 03:55'
Private_0051_100b: '192p*256s'
Private_0051_100c: 'FoV 192*256'
Private_0051_100d: 'SP F63.3'
Private_0051_100e: 'Tra>Cor(-5.3)'
Private_0051_100f: 'T:HE1-4;NE2'
Private_0051_1011: 'p2'
Private_0051_1012: 'TP 0'
Private_0051_1013: '+LPH'
Private_0051_1015: 'E'
Private_0051_1016: 'p2 M/ND/NORM'
Private_0051_1017: 'SL 1.0i'
Private_0051_1019: 'A1/IR/PFP'
Note that at PixelSpacing is [2x1 double]. What does it mean?
Thanks.
Walter Roberson
2012-11-7
[2 x 1 double] just means that it is a numeric vector whose values have not been displayed.
Tomislav
2012-11-7
Thank you. It seems that spacing is exactly 1 mm from pixel to pixel. That was confusing.
更多回答（0 个）
另请参阅
类别
在 Help Center 和 File Exchange 中查找有关 Biomedical Imaging 的更多信息
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!发生错误
由于页面发生更改，无法完成操作。请重新加载页面以查看其更新后的状态。
Translated by 
您也可以从以下列表中选择网站：
如何获得最佳网站性能
选择中国网站（中文或英文）以获得最佳网站性能。其他 MathWorks 国家/地区网站并未针对您所在位置的访问进行优化。
美洲
- América Latina (Español)
- Canada (English)
- United States (English)
欧洲
- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)
- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom (English)
亚太
- Australia (English)
- India (English)
- New Zealand (English)
- 中国
- 日本Japanese (日本語)
- 한국Korean (한국어)