LC filter for inverter

Question

Raj10dbz 2020-5-24

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/532148-lc-filter-for-inverter

评论： Raj10dbz 2020-5-26

Hi,

I am trying to put a dc link converter circuit.The issue is when i use a Dc source as input to the inverter the phase Voltage and current waveform are neat after the filter circuit, by neat i mean i get a sine wave. Now when i connect the rectifier output as input to the inverter the voltage waveform is sine but the current waveform looks distorted. I am using a sine PWM three phase inverter with switching frequency of 10kHz. The output power of the inverter is 60kVa.

Can anyone kindly help me with the issue.

Thank you.

Regards

Raj

2 个评论
显示无隐藏无

Joel Van Sickel 2020-5-26

Hello Raj,

could you provide a schematic of your circuit when you have the rectifier and dc-link capacitor attatched? Also, could you provide simulation waveforms of the voltage level of your capacitor?

Also, what source do you connect to your rectifier and what is the dc voltage of the ideal source?

Raj10dbz 2020-5-26

DCLink.pdf

Hi Joel,

Thanks for replying.

I have attached a schematic and output waveform of the capacitor voltage of the DC Link Converter.

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Sivakumar Selvam 2020-5-24

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/532148-lc-filter-for-inverter#answer_437723

Insert a DC link capacitor such way that it should reduce the ripples in the DC voltage. (say 1%).

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

Raj10dbz 2020-5-24

Hi, I have used a capacitor about 5000 micro farad, but then too the output of the inverter is distorted. When I use a dc source instead of the rectifiers output the waveforms are clean , I mean they are sine waveform. The problem occurs only when I connect the output of the rectifer to the input of the inverter.

请先登录，再进行评论。