Multiple Z axes in a 3d plot

2020 5 26
1 个回答
回答已采纳
更新时间：2023 2 4
44 次查看（30 天）

0 个投票

Hello,
I have plot the graph using plot3. I would like to plot on the right-side axis as well.
Would you please suggest me how can I do that?

2 个评论
显示 无 隐藏 无

Adam Danz
Adam Danz 2020-5-26
Does that mean you want the tick labels to appear on the right and left z-axes or you want a 2nd z=axis that has a different scale than the current z-axis?
Debasish Sarker
Debasish Sarker 2020-5-26
I want a 2nd z axis that has a different scale.

请先登录，再进行评论。

请先登录，再回答此问题。

 采纳的回答

Adam Danz
Adam Danz 2020-5-27
编辑：Adam Danz 2020-5-27

0 个投票

Matlab does not have a method of plotting in 3D with two z-axes.
To make the task even more difficult, there is no ZAxisLocation to define which side of the plot the z-axis goes even though we've got XAxisLocation and YAxisLocation.
The demo below takes the following steps.
  1. Plots data on a 3D plot
  2. Creates a 2nd axes that lays on top of the first axes in the same position.
  3. Some properties of the 2 axes are linked. Add more if needed. This will ensure that changes to one of the axes will be applied to both axes.
  4. The z-axis-limits for both axes are set. This is a very important step. You can set the z-limits to any values you want but they must be set and it must happen before setting the ticks.
  5. The z-ticks for axis #2 are computed so they align with the z-ticks from axis #1.
  6. The axis #2 is turned off.
  7. Pseudo axis ticks are created for the 2nd z axis. This uses the text() function so even though they look like real ticks, they aren't and if the axis is rotated or zoomed in, the text objects will move because they are anchored in the plot.
A lot can go wrong with this so troubleshooting will require knowing what's going on in each step. See inline comments for more detail.
ax1 = axes();
[x0,z0] = meshgrid(1:20,logspace(1,2,20));
y0 = x0;
plot3(x0.', y0, z0, '-')
grid on
box on
xlabel('x axis')
ylabel('y axis')
zlabel('z axis')
[x1,z1] = meshgrid(1:2:20,logspace(1,1.2,10));
y1 = x1;
% Define axis limits for current z-axis
% I use the current z-axis limit but it z1Lim can be any [min,max] value.
z1Lim = zlim();
% Define the axis limits for the 2nd z-axis.
% I define the 2nd z-axis limits as a scaled version of the 1st z-axis limits
% given the range of data but you can use any [min,max] value.
z2Lim = [min(z1(:)) - min(z0(:))/range(z1Lim)*range(z1(:)), ...
max(z1(:) + (1-max(z0(:))/range(z1Lim))*range(z1(:)))];
% Create duplicate axes
ax2 = axes('Position', ax1.Position);
% Plot z2 data
plot3( x1.', y1, z1, 'k-o')
% Link x and y axes, set z2 axis to
linkprop([ax1,ax2], {'XLim','YLim','Position','view'}); % Add any other properties you want to link
% Set both z axis limits. **From this point forward you cannot change any of the
% z axis scaling or ranges!
zlim(ax1, z1Lim)
zlim(ax2, z2Lim)
% Compute z2-axis ticks to match the position of z1 axis ticks
z1TickNorm = (ax1.ZTick - ax1.ZTick(1) + z1Lim(1)) ./ range(z1Lim);
z2Tick = range(z2Lim)*z1TickNorm + z2Lim(1);
ax2.ZTick = z2Tick;
% Any axes rotations or zooming must be done before setting the pseudo ticks below.
% Turn off ax2 and set ax1 tick labels to reflect both scales
ax2.Visible = 'off';
text(ax1,repmat(max(xlim(ax1)),size(ax2.ZTick)), ...
repmat(min(ylim(ax1)),size(ax2.ZTick)), ...
ax1.ZTick, strsplit((strtrim(sprintf('%.1f ', ax2.ZTick)))),...
'HorizontalAlignment','left','VerticalAlignment','middle')
% z2 axis label (1.15 factor chosen for these data)
text(ax1,max(xlim(ax1))*1.15, min(ylim(ax1))*1.15, ...
mean(z2Lim), 'Second Z axis label' ,...
'Rotation', 90)
Note that the 2nd z-axis ticks and label are text objects anchored to the plot so movement of the axes and their limits will result in the text objects moving as well:

4 个评论
显示 2更早的评论 隐藏 2更早的评论

Debasish Sarker
Debasish Sarker 2020-5-27
Many thanks for the solution ! I really appreciate your efforts. ll try this approach using my data.
Another supplementary question. Would it be an idea to make surfaces out of the lines? I mean, two different surfaces for two z axes. If possible, then by changing the facecolor and the transparency of the surfaces, both of the trends would be clearly visible without roating the graph. I am asking these, because it shows too many lines and its complicated to distniguish the two sets of data. I wonder, how to create such surfaces?
Adam Danz
Adam Danz 2020-5-27
Sure, you could plot surfaces instead of lines. You could plot any objects you want with this method. The critical part is making sure you plot to the correct axes. That can be controlled using the axis handle inputs.
This page of the documentation summarizes methods of creating 3D surface plots
https://www.mathworks.com/help/matlab/visualize/representing-a-matrix-as-a-surface.html
You can also control transparency using most (all?) of these methods.
But I don't know whether or not this will be a solution to the problem of seeing the two surfaces in a crowded plot. You could give it a try, of course, but depending on how separable the surfaces are, it may be difficult to distinguish between them.
Also, you can use view() to determine how the 3D plot is viewed and from what angle. This may help, too.
Mi Tung
Mi Tung 2020-11-11
Dear guys, I have this question too. But I can't merge two surface in one with two vertical axes. Can you help me this. Below show the code for 2 surface, which I need. Many thanks for your helping.
clear all;
clc;
% the first surface
x1 = [10,11.2,12,10,11.2,12,10,11.2,12,10,11.2,12];
x2 = [60,60,60,70,70,70,82,82,82,90,90,90];
Profit = [287.355, 295.273, 256.703, 298.625, 325.227, 316.948, 338.271, 382.907, 345.791, 266.890, 308.132, 295.042];
xv = 10:0.1:12;
yv =60:1:90;
[X,Y] = ndgrid(xv, yv);
Z = griddata(x1, x2, Profit, X, Y, 'cubic');
figure
surf(X,Y,Z)
grid on
hold on
A=scatter3(x1(8),x2(8),Profit(8),'filled','MarkerFaceColor', 'y')
set(A,'SizeData',90)
x0 = x1([8 2 5 11]);
y0 = x2([8 2 5 11]);
xlabel('Velocity, m/s'), ylabel('Cargo'), zlabel('Profit, 10^3*$')
view(-120,47)
% The second surface
x1 = [10,11,12,10,10.6,12,10,10.4,12,10,11,12];
x2 = [60,60,60,69,69,69,80,80,80,90,90,90];
Profit = [287.355, 295.273, 256.703, 298.625, 325.227, 316.948, 338.271, 382.907, 345.791, 266.890, 308.132, 295.042];
Payback = [4.75, 4.22, 4.75, 3.98, 3.55, 3.86, 4.38, 4.25, 4.32, 5.45, 4.78, 5.15];
xv = 10:0.1:12;
yv =60:1:90;
[X,Y] = ndgrid(xv, yv);
Z = griddata(x1, x2, Payback, X, Y, 'cubic');
surf(X,Y,Z)
grid on
hold on
% scatter3(x1,x2,Payback,'filled')
A=scatter3(x1(5),x2(5),Payback(5),'filled','MarkerFaceColor', 'y')
xlabel('Velocity, m/s'), ylabel('Cargo, t'), zlabel('Payback, years')
set(A,'SizeData',90)
x0 = x1([8 2 5 11]);
y0 = x2([8 2 5 11]);
xlabel('Velocity, m/s'), ylabel('Cargo, ton'), zlabel('Payback, year')
view(-120,47)
Vijay Sagar
Vijay Sagar 2023-2-4
@Mi Tung, it is always preferable to ask your question as a new question rather than in the comment section. This way the community may help you fast.

请先登录，再进行评论。

更多回答（0 个）

类别

在 帮助中心 和 File Exchange 中查找有关 Surface and Mesh Plots 的更多信息

标签

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by