How to draw line in the image through the image processing

5 次查看（过去 30 天）

Seunghyuk Lee 2020-6-3

1
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/540980-how-to-draw-line-in-the-image-through-the-image-processing

评论： Seunghyuk Lee 2020-6-4

After conducting the evaporator viusalization experiment, want to procced image processing by matlab and found out boundary line between liquid refrigerant and vapor refrigerant. I have tried it with binarize and threshold but didnt get any satisfying result.

here shows my code and the current problem is that i cant get any clear boundary as i can see in the picture with own eyes.

i'd like to ask for some advice to get through this problem

6 个评论
显示 4更早的评论隐藏 4更早的评论

Image Analyst 2020-6-4

Can you use polarizers in front of your light and your camera? Rotate the one in front of the camera lens until all the spurious reflections are eliminated. It will be much easier to process without all those reflections in there.

Seunghyuk Lee 2020-6-4

currently is it limited to eliminate the reflections due to the refrigerator's size and other spatial narrowness.

there is no other way but to proceed the image processing with these reflections.

请先登录，再进行评论。

请先登录，再回答此问题。

采纳的回答

Rafael S.T. Vieira 2020-6-3

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/540980-how-to-draw-line-in-the-image-through-the-image-processing#answer_445781

编辑：Rafael S.T. Vieira 2020-6-3

Glad to help. I've obtained that image using the Gimp editor, but, it is possible to achieve a similar result in Matlab with:

image = imread("myImage.jpeg");
A = imadjust(image, [0.2 0.8]); % adjusting color levels to enhance the image
M = edge(A(:,:,1), 'sobel') | edge(A(:,:,2), 'sobel') | edge(A(:,:,3), 'sobel'); % sobel to detect edges
N = imdilate(M,ones(5)); % dilate to obtain wider edges
O = bwareaopen(N, 1000); % to remove elements with pixel area smaller than 1000 pixels
imshowpair(image,O,'montage')

I've looked at the image histogram and used the imtool for deciding the previous parameters. The result is the following (you could try adjusting the parameters of any of these functions for obtaining a better result):