In Simbiology, how to analyze sensitivity analysis?

3 次查看(过去 30 天)
How to make the most out of the sensitivity analysis? is it enough to just look at the bargraphs and specifying the one(s) with highest magnitude?
Why is it unitless? How to interpret the numbers on the y-axis and relate them to the model?
Which type of visualization do I choose: simple plots or bargraphs? is it possible to visualize the data as heatmap?

采纳的回答

Florian Augustin
Florian Augustin 2020-6-24
Hi,
SimBiology supports different ways to analyze sensitivities. Here is a documentation page with an overview and links to different features and examples.
Local sensitivities are useful to assess how sensitive model responses (sensitivity outputs) are to variations in model parameters, species values, etc. (sensitivity inputs), at a particular state of the model. If you plot time against the sensitivities, then the y-axis are the (normalized) gradients of the sensitivity outputs with respect to the inputs. There are different normalization options available, not all are dimensionless. You can use normalization to de-dimensionalize, or rescale, the sensitivities for comparison. For example, you may want to choose full or half normalization in cases where a certain sensitivity value is acceptable for a large model response, but the same value is unacceptable for tiny values of the model response.
Here is an example for how to find important parameters using local sensitivity analysis that may be interesting. In the SimBiology Model Analyzer you get a bar plot (if only one sensitivity output is specified) or a heatmap (if the analysis contains more than one sensitivity output). The x axis in the bar/heatmap plots specifies the sensitivity inputs and y axes the sensitivity outputs integrated over time.
If you want to examine how the model behaves over a whole range of parameters, you could use a parameter scan, or take a look at the new SimBiology's global sensitivity analysis features sbiosobol and sbiompgsa.
-Florian
  2 个评论
Hassan Hijazi
Hassan Hijazi 2020-6-29
I have one output and multiple parameters as inputs. In the bar plot, how could I explian the sensitivity values? Does the integration over time make the y-axis values dimensionless?
Florian Augustin
Florian Augustin 2020-6-29
Hi,
the bars represent aggregated magnitudes of sensitivities over time. Those are useful to assess the overall sensitivity of model responses across the whole simulation time. Those values are not dimensionless as they are the integrated magnitudes of sensitivities over time. Their units depend on the units of the sensitivity inputs, sensitivity outputs, and the normalization you choose; there is no normalization over time. If you need to compare aggregated sensitivities across models with different simulation times, then you would have to rescale the values with the length of the total simulation times.
Since the bar plots show aggregate sensitivities over time, so they do not contain information whether a sensitivity value is caused by a large sensitivity over a short period of time, or a smaller sensitivity across a longer time. If this information is important, then you can look at the time plots of the sensitivities.
-Florian

请先登录,再进行评论。

更多回答(0 个)

社区

更多回答在  SimBiology Community

类别

Help CenterFile Exchange 中查找有关 Perform Sensitivity Analysis 的更多信息

产品


版本

R2020a

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by