ode45 error rungg- kutta
显示 更早的评论
help me please, i really want to run this code but i have a trouble: don't have enough argument
% This script accepts the values for the independent variables bs and ga
% and also a flag indicating which model should be used. x(1) is the
% position of the buoy. x(2) is the velocity of the buoy. x(3), x(4) and
% x(5) are the three currents. The outputs are t, x and Pout, which is the
% output power.
% Refer to Section 2 in the final report
function [t,x,Pout] = Simulation(bs,ga,flag)
% run simulation
[t,x] = ode45(@(t,x) LPM_3Phase(t,x,bs,ga,flag), [0 350], [0 0 0 0 0]);
% calculate power
RL = 7.5; %Ohm
v(:,1) = x(:,3)*RL;
v(:,2) = x(:,4)*RL;
v(:,3) = x(:,5)*RL;
Pin = x(:,3).*v(:,1) + x(:,4).*v(:,2) + x(:,5).*v(:,3);
Pout = Pin.*0.85;
end
function dx = LPM_3Phase(t,x,bs,ga,flag)
dx = zeros(5,1);
p = 6;
q = 1;
m = 3;
N = zeros(1,3);
for i = 1:3
N(i) = 82*p*q;
end
L = 0.432; %m
taup = L/p; %m
taut = taup./(m*q); %m
% bs = 0.016; %m
bt = taut - bs; %m
% ga = 0.002; %m
Kc = taut*(5*ga+bs)/(taut*(5*ga+bs)-bs^2);
geq = Kc*ga;
hm = 0.006; %m
Br = 1.2; %T
mu0 = 4*pi*10^(-7);
Hc = 905000;
phi = zeros(1,3);
for i = 1:3
phi(i) = (Br*hm*Hc*mu0)/(hm*Hc*mu0 - geq*Br);
end
if flag == 1 % Simple
um = 2.2; %m/s
uav = 2/pi*um; %m/s
T = 12.6; %s
Ra = 1.5; %Ohm
Ls = 0.115; %H
RL = 7.5; %Ohm
Ms = 4; %number of armatures
Ws = 0.2; %m
KE = Ms*Ws*N(i)*phi(i)*uav;
% u = um*sin(omegam*t);
u = um.*sin(2*pi.*t./T);
du = 2*pi.*um./T*cos(2*pi.*t./T);
e = zeros(1,3);
e(1) = KE*cos(pi.*x(1)./taup)*u;
e(2) = KE*cos(pi.*x(1)./taup - 2*pi/3)*u;
e(3) = KE*cos(pi.*x(1)./taup - 4*pi/3)*u;
v = zeros(1,3);
v(1) = x(3)*RL;
v(2) = x(4)*RL;
v(3) = x(5)*RL;
F = zeros(1,3);
for i = 1:3
F(i) = N(i).*phi(i).*pi./taup.*sin(pi.*x(1)./taup).*x(i + 2);
end
dx(1) = u; % u
dx(2) = du;
elseif flag == 2 % Complex
um = 2.2; %m/s
uav = 2/pi*um; %m/s
T = 12.6; %s
A = 4; %um*T/(2*pi); %m
Ra = 1.5; %Ohm
Ls = 0.115; %H
RL = 7.5; %Ohm
Ms = 4; %number of armatures
Ws = 0.2; %m
KE = Ms*Ws*N(i)*phi(i)*uav;
% u = um*sin(omegam*t);
u = x(2);
e = zeros(1,3);
e(1) = KE*cos(pi.*x(1)./taup).*u;
e(2) = KE*cos(pi.*x(1)./taup - 2*pi/3).*u;
e(3) = KE*cos(pi.*x(1)./taup - 4*pi/3).*u;
v = zeros(1,3);
v(1) = x(3)*RL;
v(2) = x(4)*RL;
v(3) = x(5)*RL;
F = zeros(1,3);
for i = 1:3
F(i) = N(i).*phi(i).*pi./taup.*sin(pi.*x(1)./taup).*x(i + 2);
end
rho = 1025; %kg/m^3
g = 9.81; %m/s^2
a = 0.5; %m
b = 1; %m
h = 10; %m
M = 1000; %kg
mr = 289; %kg
Rr = 16; %Ns/m
Rv = 717; %Ns/m
dx(1) = x(2);
dx(2) = -((Rr + Rv).*(x(2) - 2.*pi.*A./T.*cos(2.*pi.*t./T)) +...
rho.*g.*pi.*a.^2.*(x(1) - A.*sin(2.*pi.*t./T)))./(M + mr);
end
dx(3) = (e(1) - v(1) - x(3)*Ra)/Ls;
dx(4) = (e(2) - v(2) - x(4)*Ra)/Ls;
dx(5) = (e(3) - v(3) - x(5)*Ra)/Ls;
end
采纳的回答
更多回答（1 个）
J. Alex Lee
2020-7-1
0 个投票
your error is probably not with the ODE line, but actually running "Simulation", which you are not supplying any arguments to at the command prompt, but it expects 3 arguments: bs, ga, flag
类别
在 帮助中心 和 File Exchange 中查找有关 Ordinary Differential Equations 的更多信息
产品
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!
Translated by 
