convert csv file and write to another .m file

20 次查看（过去 30 天）
Arif Ahmed
Arif Ahmed 2020-7-5
评论： Walter Roberson 2020-7-7
Hello,
I am having problem reading in this file to matlab.
Data = readtable('100Cr6.csv','NumHeaderlines',0,'DecimalSeparator',',');
FID = fopen('kf100CR6.m', 'w');
fwrite(FID, Data, 'char');
fclose(FID);
i use the following code but it does not run successfully?
every time showing an error message:
"Error using fwrite
Cannot write value: unsupported class table
Error in convertCSV (line 15)
fwrite(FID, Data, 'char');"
i want every data in double notation (like 1231.2354) format in a .m file. so that i can use these as columns or rows of matrix.
Does anyone have a solution to this?
Many thanks.
  2 个评论
Walter Roberson
Walter Roberson 2020-7-6
you have columns that have three parts separated by semi-colon. If those are acting as decimal points then you have too many of them. If they are acting as group separation then you appear to be missing a decimal separation.

请先登录，再进行评论。

请先登录，再回答此问题。

采纳的回答

Walter Roberson
Walter Roberson 2020-7-6
filename = '100Cr6.csv';
S = fileread(filename);
S = regexprep(S, {',', ';'}, {'.', ','});
mdata = cell2mat( textscan(S, '', 'HeaderLines', 1) );
  4 个评论
显示 2更早的评论
Arif Ahmed
Arif Ahmed 2020-7-6
output of 'mdata(:,1)' should be like the followings:
and these are original data for the first column in the 'kf100CR6.m' or '100Cr6.csv' file:
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
.
.
.
.......
Walter Roberson
Walter Roberson 2020-7-7
No, it should not be. Your input data has 0,1 for the first column, but you take log() of that to create the new first column. The result is not going to be 0,1 .
Look at
exp(mdata(1:10,1))
after my suggested code, and you will see
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
If this is not acceptable, then you need to tell us how you want the input "0,1" to be interpreted. Is it a pair of numbers 0 and 1, and you want log() of the first column to be log of 0 giving you -infinity, and log of the second part (1) to give you 0 ? Is it to be interpreted as 0 times 1 plus 1 times 1/10 with the comma acting as the decimal separator ? Are we intended to somehow understand the input "0,1" as indicating a number such that the result of the log() you do gives 0.1 -- that is, is the comma in "0,1" intended to indicate that the input number is to be intepreted as exp(0.1) ?
Or is the issue that output lines such as mdata(1,:)
-2.30258509299405 -3.2188758248682 0.04 20 6.12844000213506
use decimal points, and that you need the output to instead be
-2,30258509299405 -3,2188758248682 0,04 20 6,12844000213506
?

请先登录，再进行评论。

更多回答（2 个）

jonas
jonas 2020-7-6
Error message says that table class is not supported. You can pass the content of the table or just read the data as a matrix directly. I would try
Data = readmatrix('100Cr6.csv','NumHeaderlines',1,'DecimalSeparator',',')
dlmwrite('filename.m', Data)
  5 个评论
显示 3更早的评论
Arif Ahmed
Arif Ahmed 2020-7-6
still getting same problem as mentioned above!
jonas
jonas 2020-7-6
I am getting the expected output.
Data = readmatrix('100Cr6.csv','NumHeaderlines',1,'DecimalSeparator',',')
dlmwrite('kf100CR6.m', Data)
clear all
mdata = load('kf100CR6.m');
size(mdata)
ans =
1248 4
mdata = [log(mdata(:,1)) log(mdata(:,2)) mdata(:,2) mdata(:,3) log(mdata(:,4))];
size(mdata)
ans =
1248 5

请先登录，再进行评论。

Arif Ahmed
Arif Ahmed 2020-7-6
编辑：Walter Roberson 2020-7-6
thanks for the reply...
the value that i got from the 'mdata(:,1)' does not match. please see the following example!!!
>> mdata(:,1)
ans =
-2.3026
-2.3026
-2.3026
-2.3026
-2.3026
-2.3026
-2.3026
-2.3026
-2.3026
-2.3026
-2.3026
-2.3026
-2.3026
-2.3026
-2.3026
-2.3026
-2.3026
-2.3026
-2.3026
-2.3026
-2.3026
-2.3026
.
.
.
.................
-------------------------------
and these are original data for the first column in the 'kf100CR6.m' or '100Cr6.csv' file:
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
.
.
.
.......

类别

在 Help Center 和 File Exchange 中查找有关 Large Files and Big Data 的更多信息

标签

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by