Cannot find target PC in xPC

2 次查看（过去 30 天）
Adam
Adam 2011-4-17
Hi all,
I'm having trouble setting up my laptop and a desktop to run xPC. The host seems to be having trouble finding the target. I'm using an HP tx1000 laptop as the host computer, and connecting via ethernet to a Dell intel desktop as the target. When I use the boot CD to boot into xPC on the desktop, it says "No supported pci ethernet board." I'm plugging into the built in ethernet on the target: do I need to use a separate PCI ethernet card?
When I try to compile my simulink model, it stops at "looking for target: TargetPC1."
I've assigned static IP addresses and entered those in for both the host and the target. (198.168.1.3 and 198.168.1.50 respectively.) The subnet mask is 255.255.255.0 and the TCP/IP is left blank.
The HP host laptop has a nforce motherboard with built in ethernet. The Target desktop has a Broadcom NetXtreme 57xx gigabit controller as the network adapter.
Does anyone have any ideas for troubleshooting these connections? Think there is an incompatibility issue? How would I get around that using a laptop with built in ethernet? (external card?)
All help much appreciated

请先登录，再回答此问题。

采纳的回答

Gordon Weast
Gordon Weast 2011-4-18
Adam,
Yes, Walter has it correct. The Broadcom card isn't supported on the target. We don't have a driver for it.
The laptop should be just fine, it's the target adapter that is the problem.
We're constantly adding support for more Ethernet adapters, but unfortunately, the Broadcom ones aren't on the list. We get these from the vendor for the real time kernel we're using and we can only offer what they make available to us.
We've got good support for many Intel GigaBit Ethernet boards. Take a look at: http://www.mathworks.com/products/xpctarget/xPC_Target_Supported_Ethernet_Chipsets.pdf for a discussion of what is supported.

更多回答（1 个）

Walter Roberson
Walter Roberson 2011-4-17
xPC only knows how to handle some kinds of ethernet cards. It appears the Broadcom NetXtreme 57xx is not one of them. You will probably have to look in the documentation to find a supported card and install that, and you will probably have to disable the built-in ethernet card in your BIOS.
  1 个评论
Arnaud Miege
Arnaud Miege 2011-4-17
Walter's probably right. Have a look at the list of supported Ethernet chipsets:
http://www.mathworks.co.uk/products/xpctarget/supported-hardware/xPC_Target_Supported_Ethernet_Chipsets.pdf

请先登录，再进行评论。

类别

在 Help Center 和 File Exchange 中查找有关 Multicore Processor Targets 的更多信息

标签

产品

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by