Getting shifted frequency curves instead of normal ones
3 次查看(过去 30 天)
显示 更早的评论
Why do I get somehow displaced curves ( see first picture) that should normally be an unshifted curve?(see the second picture)
The frequency is calculated through given frequency values and a time column
The code looks like the following
nexttile
Fd1 = double(split(string(fdim1(1:end-1)) , ","));
Fd1 = Fd1(:,1);
plot(timefdim1(1:end-1),Fd1);
xticks([timefdim1(1) timefdim1(end-1)]);
yticks([Fd1(1) Fd1(end-1)]);
title('dimfrequency 1')
xlabel('Uhrzeit in [HH:MM:SS]')
ylabel('Frequenzintervall 150kHz - 80 MHz')
nexttile
Fd2 = double(split(string(fdim2(2:end-1)) , ","));
Fd2 = Fd2(:,1);
plot(timefdim2(2:end-1),Fd2);
xticks([timefdim2(2) timefdim2(end-1)]);
yticks([Fd2(2) Fd2(end-1)]);
title('dimfrequency 2')
xlabel('Uhrzeit in [HH:MM:SS]')
ylabel('Frequenzintervall 80 MHz - 1 GHz')
nexttile
Fd3 = double(split(string(fdim3(3:end-1)) , ","));
Fd3 = Fd3(:,1);
plot(timefdim3(3:end-1),Fd3);
xticks([timefdim3(1) timefdim3(end-1)]);
yticks([Fd3(1) Fd3(end-1)])
title('dimfrequency 3')
xlabel('Uhrzeit in [HH:MM:SS]')
ylabel('Frequenzintervall 1 GHz - 2,7 GHz')
nexttile
F1 = double(split(string(fbll1(1:end-1)) , ","));
F1 = F1(:,1);
plot(timefbll1(1:end-1),F1);
xticks([timefbll1(1) timefbll1(end-1)]);
yticks([F1(1) F1(end-1)]);
title('bllfrequency 1')
xlabel('Uhrzeit in [HH:MM:SS]')
ylabel('Frequenzintervall 150kHz - 80 MHz')
nexttile
F2 = double(split(string(fbll2(2:end-1)) , ","));
F2 = F2(:,1);
plot(timefbll2(2:end-1),F2);
xticks([timefbll2(2) timefbll2(end-1)]);
yticks([F2(2) F2(end-1)]);
title('bllfrequency 2')
xlabel('Uhrzeit in [HH:MM:SS]')
ylabel('Frequenzintervall 80 MHz - 1 GHz')
nexttile
F3 = double(split(string(fbll3(3:end-1)) , ","));
F3 = F3(:,1);
plot(timefbll3(3:end-1),F3);
xticks([timefbll3(1) timefbll3(end-1)]);
yticks([F3(1) F3(end-1)])
title('bllfrequency 3')
xlabel('Uhrzeit in [HH:MM:SS]')
ylabel('Frequenzintervall 1 GHz - 2,7 GHz')
Thanks a lot in advance for the help.
4 个评论
采纳的回答
Ameer Hamza
2020-9-22
编辑:Ameer Hamza
2020-9-22
The time vectors were stored in categorical datatype (bad choice). Therefore, you were getting that unexpected plots. Try the following code. I have only added lines before the plot() statement.
nexttile
Fd1 = double(split(string(fdim1(1:end-1)) , ","));
Fd1 = Fd1(:,1);
timefdim1 = duration(string(timefdim1));
plot(timefdim1(1:end-1),Fd1);
xticks([timefdim1(1) timefdim1(end-1)]);
yticks([Fd1(1) Fd1(end-1)]);
title('dimfrequency 1')
xlabel('Uhrzeit in [HH:MM:SS]')
ylabel('Frequenzintervall 150kHz - 80 MHz')
nexttile
Fd2 = double(split(string(fdim2(2:end-1)) , ","));
Fd2 = Fd2(:,1);
timefdim2 = duration(string(timefdim2));
plot(timefdim2(2:end-1),Fd2);
xticks([timefdim2(2) timefdim2(end-1)]);
yticks([Fd2(2) Fd2(end-1)]);
title('dimfrequency 2')
xlabel('Uhrzeit in [HH:MM:SS]')
ylabel('Frequenzintervall 80 MHz - 1 GHz')
nexttile
Fd3 = double(split(string(fdim3(3:end-1)) , ","));
Fd3 = Fd3(:,1);
timefdim3 = duration(string(timefdim3));
plot(timefdim3(3:end-1),Fd3);
xticks([timefdim3(1) timefdim3(end-1)]);
yticks([Fd3(1) Fd3(end-1)])
title('dimfrequency 3')
xlabel('Uhrzeit in [HH:MM:SS]')
ylabel('Frequenzintervall 1 GHz - 2,7 GHz')
nexttile
F1 = double(split(string(fbll1(1:end-1)) , ","));
F1 = F1(:,1);
timefbll1 = duration(string(timefbll1));
plot(timefbll1(1:end-1),F1);
xticks([timefbll1(1) timefbll1(end-1)]);
yticks([F1(1) F1(end-1)]);
title('bllfrequency 1')
xlabel('Uhrzeit in [HH:MM:SS]')
ylabel('Frequenzintervall 150kHz - 80 MHz')
nexttile
F2 = double(split(string(fbll2(2:end-1)) , ","));
F2 = F2(:,1);
timefbll2 = duration(string(timefbll2));
plot(timefbll2(2:end-1),F2);
xticks([timefbll2(2) timefbll2(end-1)]);
yticks([F2(2) F2(end-1)]);
title('bllfrequency 2')
xlabel('Uhrzeit in [HH:MM:SS]')
ylabel('Frequenzintervall 80 MHz - 1 GHz')
nexttile
F3 = double(split(string(fbll3(3:end-1)) , ","));
F3 = F3(:,1);
timefbll3 = duration(string(timefbll3));
plot(timefbll3(3:end-1),F3);
xticks([timefbll3(1) timefbll3(end-1)]);
yticks([F3(1) F3(end-1)])
title('bllfrequency 3')
xlabel('Uhrzeit in [HH:MM:SS]')
ylabel('Frequenzintervall 1 GHz - 2,7 GHz')
2 个评论
Ameer Hamza
2020-9-24
Yes, it is possible. You can use hold() command and then call several plot commands. All of them will be drawn on one axes
hold on
plot(...)
plot(...)
更多回答(0 个)
另请参阅
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!