Hello to who ever this might interest!
although this problem is rather old, I just stumbled across it or atleast a similar problem, where the driver was not found by the Instrument Control Toolbox (ICT). Therefore, I'd like to share my solution with you or atleast reduce some error potential.
I wanted to interface the R&S oscilloscope RTA4004 and RTB2002 via Matlab (they share the same driver for PlugAndPlay) and started installing every existing driver for both x64 and x86 systems without success.
The first source of error was, that for me, the driver name was changed (was not the same as in the official Communication guide by R&S: https://www.rohde-schwarz.com/de/applikationen/so-verwendet-man-geraete-von-rohde-schwarz-in-matlab-application-note_56280-15564.html). The name changed from "rsspecan" to "rsrtx" for me and therefore all the commands containing "rsspecan" had to be changed to call "rsrtx" instead
The second source of error was about the existing support software and here most importantly about the order of installation, which is the most important part, as I just found out.
To be able to find the drivers in the ICT in Matlab I was successful by using the following installation order:
- Install the Instrument Control Toolbox (ITC)
- If you have R2022a or higher, further install the corresponding support package to get further functionalities later on (not reuired for installing the drivers though): Instrument Control Toolbox Support Package for IVI and VXIplug&play Drivers
- Install "R&S VISA" (very important): https://www.rohde-schwarz.com/us/applications/r-s-visa-application-note_56280-148812.html
- Install the "Shared Components" libraries from IVI Foundation: https://www.rohde-schwarz.com/us/applications/r-s-visa-application-note_56280-148812.html . The order is relevant as it only works in one direction. Install "IVI Shared Components" and "IVI.NET Shared Components"
- Now finally install the IVI Net and VXIPlug&Play driver for your R&S device. These are available in the R&S driver library https://www.rohde-schwarz.com/au/search/driver_63451.html?term=%2A&page=3&sort=relevance&sortOrder=desc
Ask the ICT if that worked by typing "instrhwinfo ('vxipnp', 'rsrtx')" into the Matlab command window.
