Physical Connection (Physical Modeling)
显示 更早的评论
How can I integrate custom code into Simulink and add a physical connections to the custom code blocks (such as those used in Simdriveline)?
I would like to use engine data (throttle position,torque,speed,and horsepower) from a spreadsheet in simulink and connect it to Simdriveline components.
采纳的回答
Kaustubha Govind
2011-4-28
0 个投票
I don't have experience with Physical Modeling, but I know that you can use the Simscape Language to build custom components.
Regarding importing data from spreadsheets, you can use the Signal Builder block to do this (use a Simulink-PS Converter to connect it to physical components).
更多回答（1 个）
Arnaud Miege
2011-4-28
1 个投票
You can interface between Simulink and Simscape/SimDriveline (assuming you are using the new version of SimDriveline in R2011a)using the Simulink-PS Converter and the PS-Simulink Converter blocks. If however, you just want to use a look-up table approach, I would suggest using the PS Lookup Table (1D) or PS Lookup Table (2D) as they will allow you to stay within the Simscape environment and avoid introducing algebraic loops.
If you are using an older version of SimDriveline, then you will need to use blocks like Torque Actuator, Torque Sensor, Motion Actuator and Motion Sensor to interface between Simulink and SimDriveline.
HTH,
Arnaud
类别
在 帮助中心 和 File Exchange 中查找有关 Foundation and Custom Domains 的更多信息
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!
Translated by 
