alternate effect in simulink scheme

1 次查看（过去 30 天）
Alejandro Fernández
评论： Alejandro Fernández 2020-11-9
Hello, someone would know how to modify the simulink project that I am enclosing so that by means of some button or something that could be activated in the own scheme, the blocks that I mark with the red line would be eliminated and the input and output would be connected as I show with the green line.
The idea would be to be able to have these two schemes that I show next but only in one and that could be alternated from one to another by means of some button or similar

请先登录，再回答此问题。

采纳的回答

Paul
Paul 2020-11-9
编辑：Paul 2020-11-9
Generate both inputs into C2 and pass them through a Multi-Port Switch. Do the same for the inputs to the Scope. You can then set the Control Input to the Multi-Port Switches with an output from a Constant block with a parameter you set in the base workspace to select the configuration you want. This appraoch doesn't eliminate blocks from the diagram, but functionally achieves what you're looking for. If you really need to select the configuration with a button click, use a Manual Switch output as the control input to the Multi-Port switches. This approach will only work if you have only two configurations.
  3 个评论
显示 1更早的评论
Paul
Paul 2020-11-9
Here's a simple example; perhaps you can adapt it to your needs:
Alejandro Fernández
Alejandro Fernández 2020-11-9
Yes!!, that's fine for me :D. Thank you very much for everything.

请先登录，再进行评论。

更多回答（0 个）

类别

在 Help Center 和 File Exchange 中查找有关 Simulink Functions 的更多信息

标签

产品


版本

R2020b

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by